Safety Instructions

06
Additional Components
● Long Terminal Bolts (2)
The Long Terminal Bolts (M8x1.25x20mm) are used to secure multiple cable lugs on a
single battery terminal
Preparation
Before the installation and operation of the battery, it is recommended to have the following
equipment or tools available:
● Proper Protective Equipment
● Insulated Tool(s)
● Multimeter
● Battery Cable
● Battery Charger/Charge Controller
Battery Installation
Safe and reliable installation requires trained and certied technicians. Therefore, the purpose
of this section is only to serve as a guideline as all scenarios cannot be covered.
● DO NOT short-circuit the battery terminals. Doing so can cause current bursts and lead to
irreversible damage to the system and the battery.
● Please verify the polarity before connecting the wiring. Reversing polarity can and will de-
stroy the battery.
● Please use circuit breakers, fuses, or disconnects appropriately sized by a certied elec-
trician, licensed installers, or regional code authorities to protect all electrical equipment.
Inspection
Please check for visible damage including cracks, dents, deformation, and other visible abnor-
malities. The top of the battery and terminal connections should be clean, free of dirt and cor-