User's Manual
Table Of Contents
- XS-3900 User’s Guide
- Front Matter
- Table of Contents
- List of Figures
- Introduction
- Installing the XS-3900
- Installation Prerequisites
- Planning Your Installation
- Installation Workflow
- Unpacking the XS-3900
- Installing the XS-3900
- Powering Up the XS-3900
- Establishing Communication with the Array
- Performing the Express Setup Procedure
- The Web Management Interface
- Configuring the XS-3900
- Logging In
- Making Configuration Changes to the XS-3900
- Array Status
- Express Setup
- Network Interfaces
- IAP Interfaces
- SSID Management
- Security
- Users
- Services
- Software
- Tools
- Event Log
- The Command Line Interface
- Establishing a Secure Shell (SSH) Connection
- Basic Commands
- Command Modes
- Selecting Interfaces
- Command Line Keywords
- Interface Selection
- Interface Configuration
- Radio Configuration
- Beacon Information
- System Administration
- System Testing
- Security
- Station Timeouts
- SSID Configuration
- DNS Configuration
- NTP Configuration
- DHCP Configuration
- Syslog Configuration
- SNMP Configuration
- Filters
- Radius Configuration
- Reports
- Data Handling
- Data Clearance
- Show Information
- Remove Configuration
- Help
- Appendix A: Quick Reference Guide
- Appendix B: Technical Support
- Glossary of Terms
- Index
Wireless LAN Array
The Command Line Interface 167
local
name-server
no
power
preamble
radio
reauth-period
Description: Reset to default the maximum power the AP can transmit
Usage: no { dot11 { power { local }}}
Parameters: none
Description: Disable this specific DNS server by IP address
Usage: no { ip { name-server <nsip> }}
Parameters: <nsip> specifies the IP address of the target name server to
disable
Description: Disable if enabled, or set to default value
Usage: no { ip { dhcp-server }}
Parameters: none
Description: Reset power settings to their default values
Usage: no { dot11 { power { client }}}
Parameters: none
Description: Reset preamble to the deault
Usage: no { dot11 { preamble }}
Parameters: none
Description: Disable a specific radio
Usage: no { dot11 { radio <noradionum> }}
Parameters: <noradionum> specifies the target radio to disable (1-16)
Description: Set the number of authentication retries to default
Usage: no { reauth-period }
Parameters: none