User Guide

10 RH180 Manual
Checklist to Determine Installaon
Locaon
□ The water heater is not exposed to corrosive
compounds in the air.
□ The water heater locaon complies with the
clearances stated in the manual and on the label,
located on the side of the unit.
□ The area surrounding the water heater does not
contain ammable vapors that could ignite.
□ The water supply does not contain chemicals or
exceed total hardness that will damage the heat
exchanger.
□ The water heater and its water lines are protected
from freezing.
□ A standard 3 prong 120 VAC, 60 Hz properly
grounded wall outlet or other properly grounded
120 VAC, 60 Hz source is available.
□ The installaon must conform with local codes or,
in the absence of local codes, with the Naonal
Fuel Gas Code, ANSI Z223.1/NFPA 54, or the
Natural Gas and Propane Installaon Code, CSA
B149.1.
□ Leave the enre manual taped to the water
heater or give the enre manual directly to the
consumer.