Ring Alarm Panic Button 2nd Gen Z-Wave Technical Manual 1
Ring Panic Button 2nd Gen Introduction The Ring Alarm Panic Button is a wireless sensor for the Ring Alarm system which provides users with a single action emergency button. After configuring the device, Neighbors can trigger an emergency response at the push of a button. The device is configurable in the Ring app to trigger either a Panic, Medical or Fire alert. The Ring Alarm Base Station is required to enable Panic Button features and functions within the Ring app. 1.
Z-Wave Instructions Z-Wave Device Type: Notification Sensor Role Type: Reporting Sleeping Slave (RSS) • GENERIC_TYPE_SENSOR_NOTIFICATION (0x07) • SPECIFIC_TYPE_NOTIFICATION_SENSOR (0x01) Z-Wave Long Range This device supports both Classic Z-Wave and Z-Wave Long Range. Z-Wave Long Range capable controllers can include this device as a device in the network. Long Range mode allows for a much greater operating range of the device.
LED Behavior for Inclusion Blink Pattern Smart Start Started Green LED three times, repeated after a brief pause Classic Inclusion Started Green LED three times, repeated after a brief pause Classic Inclusion Timed-Out Alternate red and green a few times Inclusion Successful (Authenticated S2) Green LED on solid Inclusion Not Successful (Self-Destruct) Red LED on solid Removing a Sensor from a Z-Wave Network Exclusion Instructions: 1.
Wake-Up Notification The sensor will wake up every so often to send a Wake-Up Notification to allow the life line master node controller that the sensor is now available for any queued messages that the controller may have for the sensor.
Association Command Class Group Identifier 1 (Lifeline) Max Nodes 0x05 Description 1. Notification Report a. See notification CC section for notifications that are sent 2. Battery Report 3. Device Reset Locally Notification Configuration Command Class The sensor has the following supported configuration parameters. 6 Parameter No. Description Number Default of Bytes 1 Heartbeats: This parameter is the number minutes between heartbeats.
Notification Command Class, V8 Sensor Condition Command Class and Value Association Group Panic Button Press detected Notification Report Type: Home Security 0x0A Event Parameter: 0x04 Panic Alert 1 (Lifeline) Tampered Notification Report Type: Home Security 0x07 State: Tampering Product Covering Removed 0x03 1 (Lifeline) Tamper Cleared Notification Report Type: Home Security 0x07 State: Previous Events Cleared 0x00 Event Parameter: 0x03 1 (Lifeline) Setup Button Pressed Notification Report Typ