Video Doorbell User Manual
Download the Ring app. The Ring app walks you through setting up and managing your Video Doorbell. Search for "Ringn in one of the app stores below, or visit ring.com/app Charge your Video Doorbell. ~ GETITON ~ Google Play Plug it into a USB power source with the included cable. Once the light ring is fully lit, it's ready to use.
Set up your Video Doorbell near your wifi router. In the Ring app, select Set Up a Device. Try it out. After setup, push the button on the front of your Video Doorbell to see video from the camera in the Ring app. When prompted, select Doorbells, and follow the in-app instructions. \ I I l • ring 8 If you have problems with video quality after installation, you may need to move your router closer to your door, or add a Ring Chime Pro. Learn more at: ring.
Select an install location. For optimal performance, install your Video Doorbell four feet above the ground. If you're connecting to existing doorbell wiring that's higher than four feet and want to angle your Video Doorbell down for a better view, you can purchase a Wedge Kit here: ring .
Camera field of view 4feet (48 inches)
Remove your existing doorbell. Mark the screw holes. First, shut off power at the breaker. Then, remove your existing doorbell button from the wall and disconnect the wires. Use the bracket as a template to mark the four corner holes. The recommended install height is 4 feet above the ground. 0 6 Please see the included pamphlet for installation precautions.
Install the anchors. (optional) On stucco, brick, or concrete, use the provided bit to drill holes in your wall, then insert the anchors. (If you're installing on wood or siding, you can skip this step.) Install the mounting bracket. Use the phillips head side of the Ring screwdriver to screw in the mounting bracket. ( ing 8 Keep the orange screwdriver handy. You'll need it to take your Video Doorbell off the wall for charging.
Install the mounting bracket. (continued) If you're wiring your Video Doorbell, feed your doorbell wires through the hole in the mounting bracket first. Drive the screws into your wall (or into the anchors, if installed) until they are flush with the mounting bracket.
Connect the wires. (optional) 0 0 Connect your doorbell wires to the screws on the rear of your Video Doorbell. It doesn't matter which wire connects to each screw. Your Video Doorbell is compatible with doorbell systems supplying 8-24 volts AC, SOmA, at 50 or 60Hz, 40VA max. Do not connect to a DC transformer, halogen or lighting transformer, or intercom.
Attach your Video Doorbell to the mounting bracket. Hook the slot on the rear of your Video Doorbell onto the tab near the top of the mounting bracket. Then, let the Doorbell pivot down to sit flush on its bracket.
Secure your Video Doorbell. Use the star-shaped end of the included screwdriver to drive the two security screws into the bottom of your Video Doorbell. Your Video Doorbell is now ready to use. If you wired in your Video Doorbell, you can now restore power at the breaker.
• ring For additional help, visit: ring.com/help Or give us a call: us 1 800 656 1918 Canada 1 855 300 7289 AU 1 300 205 983 NZ +64 9 887 9871 Worldwide + 1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring .com/ warranty © 2020 Ring LLC or its affiliates. Ring and all related logos are trademarks of Ring LLC or its affiliates. 6ACS9202 M.
. ring & IMPORTANT PRODUCT INFORMATION For Consumers in Australia )t 1523 26th St . Santa Monica, CA 90404 Our goods come with guarantees that cannot be excluded under the Australian Consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
& RENSEIGNEMENTS IMPORTANTS CONCERNANT LE PRODUIT CONSIGN ES DE SECURITE: LE NON-RESPECT DES PRESENTES CONSIGN ES DE SECURITE POURRAIT CAUSER UN INCENDIE, UNE DECHARGE ELECTRIQUE OU UNE AUTRE FORME DE BLESSURE OU DEDOMMAGE. a Votre appareil a une cote de resistance l'eau d'IPx4 et a l!:te teste pour resister aux eclaboussures d'eau dans toutes tes directions d'un vaporisateur oscillanl Votre appareil n'est toutefois pas com;:u pour un usage sous l'eau.
Setup Steps ... 1. Download the Ring app. Search for "Ring" in the App Store or Google Play Store. Open the app, create an account, tap Set Up a Device, then select Ring Video Doorbell. 2. Scan this code. This identifies your Ring to make setup fast and easy. 97502 3. Complete your setup. Continue setup in the Ring app, then install your Ring Doorbell following the supplied instructions .
Get the most from your Ring. Your Ring Video Doorbell comes with a free 30 day trial of our Ring Protect video recording service. It's great for keeping track of what happens at your doorstep. •tJ - ....... -- ,..... oo.- ~ :Jp --""'-• ... ......... Sign up today. Your first 30 days are still free. To extend your subscription and save your videos, visit: ring .
Q: What is Ring Protect? Ring Protect is a subscription service that stores videos of every event your Ring products capture. Videos are stored for up to 60 days and can be downloaded for long-term storage. Q: Why do I want it? Out of the box, your Ring lets you interact with visitors and monitor your property in real time. If you'd like to be able to review your Ring videos anytime and share them with anyone, Ring Protect is for you.
>. .0 -c ...,Cl) u ....,Cl) 0 I.. a. a, u C -ns ·a, 00 ~ 00 0 0) o·~ lO• C l.[) lO ~ • ~o > mE I.. ::J V) 0 a, -0 ...........
At Ring, our mission is to reduce crime in neighborhoods. Let every visitor know your home is protected by Ring with this sticker. Connect with us and share pictures of where you stick it at: 0 0 twitter.com/ring Q instagram.com/ring facebook.