Motion Detector
Home security beyond the front door 3 Ring Video Doorbells began a Ring of Security around your entire property. Ring Protect is the security system that takes the Ring of Security a step further giving you another level of protection for your property. Now, you can arm and disarm your system, prevent crime and protect your home - all from your phone, tablet or PC.
Contents 1. Diagram 2. In-app Setup 3. Connecting the Device 4. Physical Installation 5.
1. Say hello to your Ring Motion Detector.
Diagram Detector LED Ring 5 Mounting bracket
2. S et up your Ring Motion Detector in the Ring app.
Set up your Ring Motion Detector near your Base Station In the Ring app, choose Set Up a Device. Choose Sensors, then Ring Motion Detector, then tap Add Device.
3. Connect your Ring Motion Detector to your base station.
Pull the tab on the detector This connects the battery and turns on the device. Your base station will find it.
Scan the QR Code or enter the S2 PIN The QR Code and PIN can be found on the back of your device, on the box, or on the card in this box.
Track the connection progress of the sensor 11 Your sensor will try to connect to your base station. The sensor’s LED ring will show the progress.
4. Install your Ring Motion Detector on the wall.
Place your detector (but don’t install it yet) Hold the detector where you want to install it. Make sure the detector detects motion in the whole area.
Install your detector. 15 Use the bracket and tape or screws included in your kit. The detector can be mounted flush to the wall or angled in a corner.
View detector history in the Ring app You should have a few history events from installing your detector. Check your app to make sure it’s working.
5. Some additional details about your detector.
How to change the battery 17 Your battery should last quite a long time, but when you need to replace it, press the clip and remove the detector cover.
© 2017 Bot Home Automation, Inc. RING, ALWAYS HOME, and CHIME are trademarks of Ring, Inc.
