User guide

www.RFM.com Technical support +1.678.684.2000 Page 11 of 21
© 2011 by RF Monolithics, Inc. E-mail: [e-mail]
DN-2400E User Guide - 08/05/11
6.0 DN-2400ESK and DN-2400EPSK Starter Kits
It is highly recommended that a Starter Kit containing two DN-2400E or DN-2400EP units be purchased
initially for installing a network. The Starter Kit enables you to set up a point-to-point Ethernet connection
very quickly using the units default settings. The Kit also contains all the necessary hardware and soft-
ware to make any changes to the default settings required by your application. Additional Remotes can
then be added to the point-to-point network to form a point-to-multipoint network.
Figure 6.0.1
6.1 Items Supplied with Each DN-2400ESK/EPSK Starter Kit
The Starter Kit contains the following:
• Two Wireless Ethernet Bridges (one Base and one Remote)
• Two Antennas
• Two Universal Wall Plug Power Supplies
• Two Ethernet Cables
• One Configuration Module with Universal Wall Plug Power Supply
• One DB9 M/F Cable
• CD with Documentation and Configuration Software