Specifications

5. MAINTENANCE, ADJUSTMENTS AND CALIBRATION

5. MAINTENANCE,

ADJUSTMENTS AND

CALIBRATION

5.1 OVERVIEW

MFC-CB was designed for maintenance free operation. No maintenance is required other than:

• Electrical Output and Measurement Calibration: The stability of the analog voltage and

current measurements over time is dependent upon the conditions of use. The MFC-CB voltage

and current functions should be verified regularly. See Section 5.2 for instructions.

Calibration, maintenance and repair services for MFC-CB are offered by DHI Authorized Service

Providers (see Table 18).

MFC-CB is a sophisticated measurement and control instrument with advanced on-board features

and functions. Before assuming that unexpected behavior is caused by a system defect or breakdown,

use this manual to become thoroughly familiar with MFC-CB operation. For rapid assistance in

specific situations and other troubleshooting information, see Section 6.

MFC-CB is covered by a limited one year warranty (see Section 7.5). Unauthorized service or repair

during the warranty period is undertaken at the owner's risk and may cause damage that is NOT

covered under product warranty and/or may void the product warranty.