User's Manual

Configure pcProx Templates

The application allows you to save templates (.HWG files)

representing your configuration choices for retrieval at a

later time. The templates may also be used to auto-run the

application. To use the auto-run mode you need to save a

template file and specify this as a command line

parameter (See Auto-Run Operation section below).

Configuration Choices

There are many configuration setting choices in Allows

the user to

1. Choose between the pcProx operating as a

keyboard or as an embedded device requiring

the SDK,

2. Specify which bits read from the pcProx reader

are used to construct the ASCII number,

3. Specify if any additional keystrokes are added to

the ASCII number when it is sent to the

keyboard buffer,

4. Set the data to a fixed length, and

5. Set various timing parameters.