Installation Guide

10
7.) Bend the holding tabs you selected outward.
8.) Set FAN into place in the opening using holding tabs, now the tabs hold the fan
in position in the ceiling opening.
holding tab
holding tab
holding tab
WARNING: Disconnect the AC power before any work is done to any part of
the circuit ReVent is connected to. If you do not understand this warning,
seek the services of a qualified licensed electrician.
WARNING: Copper to copper only. Do not use aluminum wire.
WARNING: Follow all local electrical and safety codes, and NEC (National
Electrical Codes).
CAUTION: If your house wires do not match these colors, determine what
each house wire represents before connecting. You may need to consult a
qualified licensed electrician to determine this safely.
9.) Remove the electrical cover and open the electrical enclosure. Connect wiring
using the provided WIRE NUTS, matching wire colors as shown:
black / power
white / neutral
green /
green / ground
120V Line AC
FAN
Close-Up View
3 wires 2 wires
2 wires
QUICK CONNECT
OR WIRE NUT
Qty:3