Instructions

• Thesymbolfortheexternalsensorashesinthedisplay.Thedeviceswitchesto

searchmode.(Ifthesymbolstopsashing,youcankeepthesearchbutton(12)on

theweatherstationpressedfor3seconds,tostarttheRFsearch.)

• Press the Transmit (19) button at the bottom of the external sensor to send the RF

signal to the weather station, if the weather station is in search mode.

• Allinformationincludingexternaltemperature,humidity,windspeed,winddirection,

precipitationandtheUVindexaredisplayedontheweatherstation,iftheweather

stationandexternalsensorarewithintheeectivetransmissionrange.

• To obtain a good RF signal try to turn the wind turbine and change the alignment

ofthewindvaneontheexternalsensor,whereuponthewindspeedanddirection

shouldbeupdatedwithin2minutes.TheRFsignalisstilltooweakifanupdatedoes

notappeareachminuteonthedisplay.ToobtainagoodRGreceptionsignalreduce

thetransmissionrangeandrepeatthetestingofthetransmissionrangeasdescribed

above,untileachminuteoftheupdateappearsontheweatherstation.

• Removeallbatteriesfromtheexternalsensoraftertestingtheeectivetransmission

range.Inadditionremoveallbatteriesfromtheweatherstationanddisconnectthe

powersupplyfromthemainunit.

c) Installation and calibration

• Aftertestingtheeectivetransmissionrangeyoucaninstalltheexternalsensorat

thepointselectedbyyou.Forthisyourequireamastwithadiameterofapproximately

25-30mm(notsupplied)whichstandssteadilyandvertically.

• PositiontheU-shapemetalplatesatthemast.Insertthefourhexagonboltsthrough

the holes in the metal plates and the holes in the mounting plate of the outdoor

sensor.Securetheinstallationusingthenutsprovided.

• After attachment check whether the external sensor is aligned horizontally so that

precisemeasurementsofthewindspeedanddirectionaswellastherainfallandthe

UV index are guaranteed.

• Youcanalsoattachtheexternalsensortoawallusingscrewsandplugs.

• Beforescrewinginascrewforthewallmountingordrillingaholeforaplug,you

shouldestablishwhetheritispossiblefortheweatherstationtoperfectlyreceive

radio data from the external sensor.