Manual

41
9.6 Assemble the tonearm
Important:
– Do not touch the stylus with anything other than a stylus brush.
– Attach the included stylus guard when the turntable is not in use to prevent
accidental damage.
– Do not allow the stylus to bump against the platter, rubber mat, or edge of
the record.
– To protect the tonearm and headshell, place the tonearm on the rack and se-
cure it using the clamp until ready to use.
9.6.1 Attach the headshell to the tonearm
2
1. Align the headshell plug with the
tonearm socket.
2. Finger tighten the socket screw to
secure the headshell.
9.6.2 Attach the counterweight
Note:
For information about how to set the counterweight, see section: Balance the
tonearm [}43].
2
■
Screw the counter weight into the back of the tonearm as shown.
■
The tracking force gauge should face towards the tonearm.