User manual

38
c) Vibrato Eect, Button “MODULATION”
Press the “MODULATION” button (17) to switch the Vibrato eect
on or o.
If the eect is switched on, the top centre of the display shows “U1
ON”. If the eect is switched o, the display shows “U1 OFF”.
Play a note on the clavier and switch the eect on or o to hear the
dierent sound.
d) DSP Eect, Button “DSP”
Press the “DSP” button (20) to switch the DSP eect on or o. When
the DEP eect is switched on, every instrument will sound fuller.
If the eect is switched on, the left of the display shows a small
symbol for “DSP”.
Play a note on the clavier and switch the eect on or o to hear the
dierent sound.
e) Transpose Function
With the transpose function, you can change playback in half-tone
steps when playing the clavier, similar to tuning a real instrument.
Press “FUNCTION” (12) until the display shows “TPS 0”.
Usethebuttons“+”or “-”(19)toadjustplaybackin12 half-tone
steps(-6.....+6).
With the keyboard in setting mode (“TPS....” is displayed), you can
resetthesettingto“0”bypressingthetwobuttons“+”and“-”at
the same time.
f) Selecting Piano Instrument, Button “PIANO”
Pressing the button “PIANO” (23) directly activates the piano ins-
trument with the correct pre-settings independently of any other
settings.
Pressing “PIANO” again returns to the previous settings.
DSP