User's Manual

Rev.1.10 Jul 01, 2005 page 79 of 318
REJ09B0124-0110
M16C/6N Group (M16C/6NK, M16C/6NM) 9. Interrupt
Under development
This document is under development and its contents are subject to change.
Figure 9.16 AIER Register, AIER2 Register and RMAD0 to RMAD3 Registers
RW
-
Address Match Interrupt Enable Register
Address Match Interrupt 0
Enable Bit
Address Match Interrupt 1
Enable Bit
0 : Interrupt disabled
1 : Interrupt enabled
0 : Interrupt disabled
1 : Interrupt enabled
Symbol Address After Reset
AIER 0009h XXXXXX00b
AIER0
AIER1
-
(b7-b2)
RW
Bit Name Function
Bit Symbol
RW
Nothing is assigned. When write, set to "0".
When read, their contents are indeterminate.
b7 b6 b5 b4 b3 b2 b1 b0
RW
-
Address Match Interrupt Enable Register 2
Address Match Interrupt 2
Enable Bit
Address Match Interrupt 3
Enable Bit
0 : Interrupt disabled
1 : Interrupt enabled
0 : Interrupt disabled
1 : Interrupt enabled
Symbol Address After Reset
AIER2 01BBh XXXXXX00b
AIER20
AIER21
-
(b7-b2)
RW
Bit Name Function
Bit Symbol
RW
Nothing is assigned. When write, set to "0".
When read, their contents are indeterminate.
b7 b6 b5 b4 b3 b2 b1 b0
RW
-
-
(b19-b0)
-
(b23-b20)
Bit Symbol
AddressSymbol After Reset
0012h to 0010h
0016h to 0014h
01BAh to 01B8h
01BEh to 01BCh
RMAD0
RMAD1
RMAD2
RMAD3
X00000h
X00000h
X00000h
X00000h
Function
Setting Range
RW
Address setting register for address
match interrupt
Nothing is assigned. When write, set to "0".
When read, their contents are indeterminate.
Address Match Interrupt Register i (i = 0 to 3)
00000h to FFFFFh
b0 b7 b0b3
(b19) (b16)
b7 b0
(b15) (b8)
b7
(b23)