ADJUSTABLE BED MANUAL TWIN XL / FULL / QUEEN / KING
CONTENTS Safety Precautions Page 3 Parts List Page 4 Installation Guide Page 5 Remote Controls and Functions Page 7 Bluetooth and Mobile App Guide Page 10 Weight Limits Page 12 Operating Noises Page 12 Basic Troubleshooting Guide Page 13 Warranty Page 15
SAFETY PRECAUTIONS Important: Please read all directions before using the product and retain this guide for reference. ELECTRICAL SAFETY TO REDUCE THE RISK OF SHOCK, BURNS, FIRE OR INJURY : Input voltage: AC 100-240V. 50/60HZ, output: DC29V 2.0A. Keep the product wire, power supply, and control box away from heat. Do not use this product in a humid environment. The connector part of the wire, and the gap between the motor and the control box, cannot be exposed to liquid or high humidity.
PARTS LIST GET TO KNOW YOUR ADJUSTABLE BED Please ensure you have received all the parts listed below before discarding the packing materials.
INSTALLATION GUIDE SETTING UP YOUR ADJUSTABLE BED 1 Lay the carton flat on the floor and carefully cut it open. Lift the carton so that the open side faces down and slide it up and off the bed. Place the bed upside-down flat on the floor. Remove the binding straps and packing materials, making sure not to puncture the box with any sharp objects. Cut the zip ties, take out all the part boxes and the mattress rail, and check that you have all the necessary parts according to the parts list.
INSTALLATION GUIDE SETTING UP YOUR ADJUSTABLE BED 6 When first-time use, we need to pair the Matching code: Press the head up button, and foot up remote with the control box. Make sure there button at the same time and don't loosen. is a power supply for both the base and Then press the little button at the side of the control box. remote when you process the pairing.
REMOTE CONTROL AND FUNCTIONS
REMOTE CONTROL AND FUNCTIONS GET TO KNOW HOW YOUR BED WORKS Button Operation Button Operation Click to reach Lounge Position (Factory Setting: Backrest 30°, Legs 16°) Click to set a user-defined position 1. Click to reach TV Position (Factory Setting: Backrest 45°, Legs 27°) Click to set a user-defined position 2. Click to reach Zero Gravity Position (Factory Setting: Backrest 17°, Legs 36°) Click to flatten the bed. Press and hold to raise both legs and backrest.
REMOTE CONTROL AND FUNCTIONS GET TO KNOW HOW YOUR BED WORKS Memory Setting: Setting M1 & M2 positions, and resetting the TV/LOUNGE/ZG positions if you are not satisfied with the factory setting: 1. Press the FLAT button to flatten the bed. 2. Adjust the bed to your preferred position by pressing head and foot up/down button. 3. Press and hold the setting button M1/M2/TV/LOUNGE/ZG, and let go after hearing the “didi” sound, which indicates the setting has been successfully programmed. 4.
BLUETOOTH & MOBILE APP GUIDE GET TO KNOW HOW YOUR BED WORKS Step 1. Step 2 - B Scan the QR code as follows and you will be If you are an Iphone user, you will be redirected redirected to the browser and let you download to the interface shown below. apprmcontrol. Step 2—A. If you are an Android user, you will be redirected to the interface shown below. Note: For those who are in China, please click "安卓（中国)” to download; For those who are outside China, please click "Android (Global)" to download.
BLUETOOTH & MOBILE APP GUIDE GET TO KNOW HOW YOUR BED WORKS Step 4 Scan the QR code, upon clicking the 10 digit device. Step 5 You will be redirected to the interface shown. Enter "XJRM", click search, and the operation interface will appear. At this time, the mobile phone can control the operation of the motor .
Weight Limits WEIGHT LIMITS & OPERATING NOISES The recommended weight restriction for the adjustable base is 1000 pounds, which is calculated to include the weight of the mattress. To calculate the weight limit, subtract the weight of the mattress from 1000 pounds. The bed will support the recommended weight limits if distributed evenly across the base. This product is not designed to support or lift the total maximum weight limit by the head or the foot section only.
How to sync the remote: TROUBLESHOOTING GUIDE 1. You may use one remote to operate two bed bases (For 2 * Twin XL/ Split King beds) 2. How to match code? Please see Page 6, Installation Guide Step 8. Note: Kindly ensure that you follow the steps. If it will not work, unplug both of the beds to reset electrical components.
TROUBLESHOOTING GUIDE Issue/Problem Solution Head or foot section elevates adjusta- - Your adjustable bed may be obstructed preventing smooth operation. ble bed but does not return to flat posi- Remove obstructions from around and under the bed. tion? - If a headboard is installed, check that it is not too close to the edge of the mattress. Make sure there is enough distance between the headboard bracket and the mattress.
WARRANTY 10-YEAR LIMITED WARRANTY INFORMATION This warranty applies to Renanim Adjustable Base and is extended only to the consumer who makes the original purchase. This warranty is not transferrable. The "adjustable base" does not include the mattress. "Warranty Commencement Date" means the date the purchaser purchased a new and unused Renanim Adjustable base. Renanim warrants this adjustable base to the purchaser on the terms and over the reducing periods of time set out below.
