Use and Care Manual

ManualsBrandsRelaxzen ManualsAccent ChairsMocha 8-Motor Massage Recliner with Lumbar Heat and Ottoman

Table Of Contents

Blank Page

For fastest service on claims, replacement parts or questions,

www.comfortproducts.net/support

e-mail: customerservice@comfortproducts.net

Keep your sales receipt as documentation of your ownership.

CUSTOMER SERVICE

8 MOTOR MASSAGE RECLINER WITH HEAT AND OTTOMAN, CREAM

MODEL 60-051002

SUPPLIER CODE: BJTJ

do not return to store. Please visit our website at:

ASSEMBLY INSTRUCTIONS

Summary of content (7 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL 60-051002 SUPPLIER CODE: BJTJ 8 MOTOR MASSAGE RECLINER WITH HEAT AND OTTOMAN, CREAM CUSTOMER SERVICE For fastest service on claims, replacement parts or questions, do not return to store. Please visit our website at: www.comfortproducts.net/support e-mail: customerservice@comfortproducts.net Keep your sales receipt as documentation of your ownership.
PAGE 2
CONTENTS EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE. PARTS LIST PART 1 2 3 HARDWARE KIT 61-0510HA DESCRIPTION STOCK# Back Cushion QTY. 61-051002BC Seat Cushion with Base 61-051002ST Armrest 1 1 61-051002RA 61-051002LA 1 1 4 Ottoman Cushion 61-051002OTC 1 5 Ottoman Frame 61-0510FRAME 1 6 Ottoman Base 61-0510BASE 1 7 Back Tension Knob 61-0510KNOB 1 61-7000MCTR 1 61-7000MAD 1 PART DESCRIPTION QTY.
PAGE 3
STEP 1 STEP 2 Attach the Back Cushion (1) to the Seat Cushion (2) using two M8 x 25mm screws with locking nuts (A). To tighten use the Large Wrench (J) and the 6mm Allen Wrench (H). Using a low table or a box as shown below may help with this step. Attach the Back Cushion (1) to the Base (2) using two M8 x 60mm screws (B) and the 8mm Allen Wrench (I). 1 A 1 2 B 2 STEP 3 STEP 4 Attach the Right and Left Armrests (3) using four M6 x 20mm screws (D) and the 6mm Allen Wrench (H).
PAGE 4
STEP 5 Attach the Ottoman Cushion (4) to the Ottoman Frame (5) using four M6 x 18mm screws (C), four Small Washers (G) and the 6mm Allen Wrench (H). Flip the ottoman over and place in front of the chair. 5 C G 4 STEP 6 Connect the massage Controller (8) and Adapter (9) as shown (make sure the controller cord is aligned properly before connecting). Connect the two cords at the back of the Seat Cushion with the remaining cords in the Back Cushion (the red plug with red and white plug with white).
PAGE 5
FUNCTION INSTRUCTIONS TO USE MASSAGE CONTROL This massage chair is designed with 8 vibration motors and soothing heat function at the lumbar area. For the manual setting, press any one of the zone buttons. You may now manually select which zones to engage up to all 4 at once. (NOTE: pressing the MODE button takes you back out of the manual setting) To engage the massage press the POWER button. Change the mode, zone, intensity, and heat as desired.
PAGE 6
FREQUENTLY ASKED QUESTIONS • WHERE DO I FIND THE MODEL NUMBER AND SUPPLIER CODE FOR MY CHAIR? The chair model number and supplier code is located on a sticker underneath the seat cushion, and on the front page of your instruction manual. • HOW DO I ORDER REPLACEMENT PARTS? WHEN AM I GOING TO RECEIVE THEM? warranty, there is no charge for replacement parts. We normally ship replacement parts within 48 hours.
PAGE 7
SAFETY AND MAINTENANCE • • • • • • • • • • DO NOT stand on the chair. DO NOT use the chair as a stepladder. Use this product for seating one person at a time. DO NOT Avoid contact with sharp objects to prevent puncturing the fabric. If parts are missing, broken, damaged or worn, stop use of the product until repars are made using factory authorized parts. Always unplug the massage chair from the power source after using and before cleaning.