Installation Guide

Recommended Products:

Reflective/Bubble/Bubble/Reflective - Roll: BP48100 (48”x 100’)

Open Interior with 3/4” Thermal Breaks

R-10* Heat Flow Down (and a Radiant Barrier)

R-4.5* Heat Flow Up

Open Interior without Thermal Breaks and a Nominal 3/4” Drape

R-7.6* Heat Flow Down (and a Radiant Barrier)

R-3.9* Heat Flow Up

Please Note: In addition to the stated R-value, this application also provides a Radiant Barrier.

As a result, a 96% reduction of the radiant energy that ordinarily would be transmitted to the interior of the building is blocked.

Installation Instructions: (There are 2 options)

1. Open Interior with 3/4” Thermal Breaks

• After the red metal is erected, install the Reflectix

Reflective/Bubble/Bubble/Reflective product over

the purlins by using 1/2” self-tapping metal screws and screwing the product to the purlins.

1. Reflectix

Insulation

2. Exterior Roof Panel

3. 3/4” Thermal Break

4. Purlin

5. Red Metal (Structural

Frame)

Tools Required:

Safety Glasses

Tape Measure

Utility Knife

Screw Gun

Metal Building / Roof / New

Reflectix

Installation Instructions