Installation Guide

Recommended Products:

Reflective/Bubble/Bubble/Reflective - Roll: BP24025 (24”x 25’)

Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll: ST16025 (16”x 25’), ST24025 (24”x 25’)

Installation Instructions:

1. R-3.7 (1”x 2” furring with 1 air space)

• Attach 1”x 2” (nominal) furring strips vertically directly over the 2 x 4 studs (behind the sheetrock) on the

wall.

• Cut the Reflectix

(with scissors or a utility knife) into lengths equal to the height of the wall (floor to

ceiling).

• Staple the product to the face of the furring strip - product seams should split on a furring strip.

• One air space is created between the Reflectix

and the previously existing wall.

• Finish with interior panel (or sheetrock) of choice.

2. R-4.2 (2”x 2” furring with 1 air space)

• Same as above except utilize 2”x 2” (nominal) furring.

DIY Wine Room| (R-3.7, R-4.2, R-6.1)

Reflectix

Installation Instructions

1. Reflectix

Insulation

2. Interior Panel

3. Furring Strip

4. Pre-existing Sheetrock

Tools Required:

Safety Glasses

Staple Gun

Tape Measure

Utility Knife/Scissors