Application Guide

Description ST-20(Y) ST-30(Y) ST-20SS(Y) DS-30(Y)
ST-30SS(Y)
DS-30SS(Y)
SL-40
ST-40
A
BOT TURRET
OD DIAMETER (FLATS)
16.16” (410mm) 16.16” (410mm)
— — —
22.27” (566mm)
A1
VB12/24 TURRET
OD DIAMETER (FLATS)
18.95” (481mm) 18.95” (481mm) 21.45” (545mm) 18.95” (481mm) 21.20” (538mm) 22.27” (566mm)
A2
VDI TURRET
OD TURRET DIAMETER
19.00” (483mm) 19.00” (483mm)
— — —
23.75” (603mm)
B
VB12/24 TURRET
VDI40 POCKET CIRCLE
15.63” (397mm) 15.63” (397mm) 18.25” (464mm) 15.63” (397mm) 18.25” (464mm) 20.00” (508mm)
B1
*VDI TURRET
VDI40 POCKET CIRCLE
15.63” (397mm) 15.63” (397mm)
—
15.63” (397mm)
—
20.00” (508mm)
C
VB12/24 TURRET
VDI40 POCKET SPACING
7.81” (198mm) 7.81” (198mm) 4.69” (119mm) 7.81” (198mm) 4.69” (119mm) 10.00” (254mm)
C1
*VDI TURRET
VDI40 POCKET SPACING
4.04” (103mm) 4.04” (103mm)
— — —
5.17” (131mm)
D
BOT TURRET
FROM FLATS TC CLEARANCE
6.90” (175mm) 8.00” (203mm)
— — —
9.00” (229mm)
D1
VB12/24 TURRET
FROM FLATS TC CLEARANCE
5.50” (140mm) 6.85” (174mm) 4.50” (114mm) 6.85” (174mm) 5.85” (149mm) 9.00” (229mm)
D1
VB12/24 TURRET
FROM VDI40 CENTER TC CLEARANCE
7.00” (178mm) 8.35” (212mm) 6.00” (152mm) 8.35” (212mm) 7.35” (187mm) 10.00” (254mm)
D2
VDI TURRET
FROM VDI40 CENTER TC CLEARANCE
7.00” (178mm) 8.35” (212mm)
— — —
10.00” (254mm)
E
BOT TURRET
BOLT-ON TOOL MAX REAR STICKOUT
4.00” (102mm) 4.00” (102mm)
— — —
4.37” (111mm)
E
VB12/24 TURRET
BOLT-ON TOOL MAX REAR STICKOUT
4.00” (102mm) 4.00” (102mm) 4.00” (102mm) 4.00” (102mm) 4.00” (102mm) 4.37” (111mm)
E
VDI TURRET
VDI40 POCKET MAX TOOL REAR STICK-
OUT
0.40” (10.2mm) 0.40” (10.2mm) 0.40” (10.2mm) 0.40” (10.2mm) 0.40” (10.2mm) .40” (10.2 mm)
F
**REC. MAX TOOL STICKOUT FROM
FACE OF TURRET AT FULL Z TRAVEL
5.00” (127mm) 5.00” (127mm) 5.00” (127mm) 5.00” (127mm) 6.00” (152mm)
***
G
BOT TURRET
ID TOOL POCKET DIAMETER
18.66” (474mm)
— — — —
25.42” (646mm)
H
VB12/24 TURRET
ID TOOL POCKET DIAMETER
21.45” (545mm) 21.45” (545mm) 23.20” (589mm) 21.45” (545mm) 23.20” (589mm) 25.42” (646mm)
I
BOT TURRET
ID TOOL POCKET SPACING
4.80” (122mm)
— — — —
6.60” (168mm)
J
VB12/24 TURRET
ID TOOL POCKET SPACING
10.72” (272mm) 10.72” (272mm) 6.00” (152mm) 10.72” (272mm) 6.00” (152mm) 12.76” (324mm)
*ST-10 VDI POCKETS ARE STAGGERED **EXCEEDING THIS STICKOUT MAY RESULT IN COLLISION WITH THE FRONT BULKHEAD
***A 25” (635 mm) DEEP POCKET IN THE ST-40 AND ST-40L PROVIDES CLEARANCE FOR BORING BARS AND LONG TOOLS.
D2
A2
B1
C1
D
G
I
A
D1
C
B
H
J
A1
D1
A1
J
H
B
C
E
F
(BOT TOOL POCKETS ONLY)
D2
C1
B1
C1
Max Tool Stick Out
BOT Turret
VDI Turret
ST-10 VDI Turret
VB Hybrid 12 Station VB24 Hybrid 24 Station
(All SS Models)