All rights reserved.
All rights reserved.
All rights reserved.
Insert dowels (A) into panels (2,3,4). Screw Cam Bolts (C) into panels (3,4). Insert dowels (A) into panel (6). Insert dowels (B) into slats (9). All rights reserved.
Screw cam bolts (C) into top panel (1). Screw cam bolts (C) into bottom panel (5). All rights reserved.
Attach panels (3,4) to panel (6) using cam bolts and dowels as guides. Secure panels (3,4) to panel (6) using cam locks (D). Tighten cam locks (D) with a screwdriver. Attach slats (9) to panels (3,4) using cam bolts and dowels as guides. All rights reserved.
Attach panels (2) to slats (9) using dowels as guides. Attach the assembly from the previous step to bottom panel (5) using cam bolts and dowels as guides. All rights reserved.
Secure panels (2,3) to bottom panel (5) using cam locks (D). Tighten cam locks (D) with a screwdriver. Secure panels (2,4) to bottom panel (5) using cam locks (D). Tighten cam locks (D) with a screwdriver. All rights reserved.
Carefully fit top panel (1) into place using cam bolts and dowels as guides. Secure top panel (1) to panels (2,3) using cam locks (D). Tighten cam locks (D) with a screwdriver. All rights reserved.
Secure top panel (1) to panels (2,4) using cam locks (D). Tighten cam locks (D) with a screwdriver. Attach panel (11) to the back of the console using screw (G). All rights reserved.
Attach panel (10) to the back of the console using screws (G). Attach panel (12) to the back of the console using screws (G). All rights reserved.
Attach panel (13) to the back of the console using screws (G). Cover all visible cam locks with stickers (L) as desired. All rights reserved.
Inserts the shelf support pins (K) to the panel (2,3,4) at desired shelf heights. Carefully place shelves (7,8) in console. Shelves (7,8) will rest on the shelf support pins. All rights reserved.
Attach hinges (H) to door (14,15) using screws (J). Repeat this step for the second set of doors. Attach doors (14) to panels (2) using screws (J) at hinges (H). See page 2 for specific instructions on how to adjust hinges so doors are aligned with console as desired. Attach handles (E) to doors (14) using bolts (F). All rights reserved.
Attach doors (15) to panels (3,4) using screws (J) at hinges (H). See page 2 for specific instructions on how to adjust hinges so doors are aligned with console as desired. Attach handles (E) to doors (15) using bolts (F). All rights reserved.