Warranty Information

ManualsBrandsRed Barrel Studio ManualsBathroom Vanity LightingSeydou 2-Light Vanity Light

LIMITED WARRANTY

Limited Warranty (“Warranty”): Subject to the exclusions set forth below, warrants that (i) all manufactured products will be

free from defects in material and workmanship which cause the Products to fail to operate in accordance with the

specifications set forth in the documentation published or provided with the Products (the “Specifications”) for a period of

one (1) year from the date of shipment (“Non-LED Warranty Period”) and (ii) all light emitting diode (“LED”) Products, will be

free from defects in material and workmanship which cause the Products to fail to operate in accordance with the

Specifications for a period of five (5) years from the date of shipment (“LED Warranty Period”). For purposes of this

Warranty, references to “Warranty Period” shall refer to either the Non-LED Warranty Period or the LED Warranty Period,

depending on the type of Product purchased by the End User. We warrants that any standard finish on a Product (other than

Homestyle branded Products) will be free from cracking, peeling, excessive fading, and corrosion defects during the applicable

Warranty Period. Extended warranties for fan motors and Energy Star® Products may apply; please refer to Product manuals for

more information. For LED Products, the LED arrays in the Products will be considered defective in material or workmanship

only if a total of 15% or more of the individual LEDs in the Products fail to illuminate.

Exclusions: This Warranty applies only when the Products have been properly handled, stored, wired, transported,

installed, operated and maintained in accordance with the applicable Specifications, including, without limitation, installation in

applications in which ambient temperatures are within the range of specified operating temperatures and operation within the

electrical values shown on the Specifications. We shall have no responsibility under this Warranty for any failure of the Products

that results from external causes including without limitation: acts of nature; physical damage; exposure to adverse or

hazardous chemicals or other substances; use of reactive cleaning agents and/or harsh chemicals to clean the Products;

environmental conditions; vandalism; fire; power failure, improper power supply, power surges or dips, and/or excessive

switching; fatigue failure or similar phenomena resulting from induced vibrations, harmonic oscillation or resonance associated

with movement of air currents around the Product; animal or insect activity; fault or negligence of the purchaser of the

Products, any end user of the Products and/or any third parties not engaged by us, improper or unauthorized use, installation,

handling, storage, alteration, maintenance or service, including failure to abide by any product classifications or

certifications, or failure to comply with any applicable standards, codes, recommendations, product specification sheets, use

of Products with products, processes or materials supplied by the purchaser of the Products, any end user or third parties, or

any other occurrences beyond reasonable control. In addition, we shall have no responsibility under this Warranty for any

substantial deterioration in the Product finish that is caused by failure to clean, inspect or maintain the finish of the

Products. During the Warranty Period some staining, chalking or fading may occur. This is normal aging of the finish and is not

a manufacturing defect; therefore it is not covered by this Warranty. Neither polycarbonate nor acrylic material used in the

Products is warranted against yellowing, as yellowing may naturally occur over time due to normal aging. If the Products are

used on existing foundations, anchorages or structures, the purchaser of the Products and/or any end user is solely

responsible for the structural integrity of such existing foundations, anchorages or structures and all consequences arising

from their use.

Adequate records (as determined by us in its sole discretion) of operating history, maintenance, and/or testing must be kept by

the end user and provided to us upon request to substantiate that the Products have failed to comply with the terms of this

Warranty. The Products are not warranted against costs that may be incurred in connection with changes or modifications to

the Products required to accommodate site conditions and/or faulty building construction or design. In addition, the

Products are not warranted against cost resulting from installation of third party components, failures of third party supplied

components, or failures of our supplied Products caused by third party supplied components. This Warranty is not

applicable to any product(s) which are not installed and operated in accordance with the current edition of The National

Electric Code (NEC), the Standards for Safety of Underwriters’ Laboratory, Inc. (UL), or the standards for the American National

Standards Institute (ANSI), and with instructions and guidelines for the Product. THIS WARRANTY IS VOID WITH RESPECT TO

ANY PRODUCT IF THE PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH IT WAS DESIGNED OR IF ANY REPAIRS OR

ALTERATIONS ARE MADE BY ANY PERSON NOT AUTHORIZED BY US IN WRITING.

Except as otherwise set forth herein, we does not warrant ballasts, battery packs, lamps, photocells, occupancy sensors, low

voltage indicators, fuses, surge suppressors, surge protection devices, high intensity discharge (“HID”) components and

other third party devices that are not manufactured by us, which are covered by the applicable third party manufacturer

warranty (if any). Such third party manufacturer shall be solely responsible for the costs related to any claims associated with

any such devices. Warping of wooden or plastic blades is not covered by this Warranty. Metal finishes on Homestyle brand

outdoor Products are not covered by this Warranty.

Remedy: If the Product(s) fail to comply with the terms of this Warranty and the end user (and the purchaser of the

Product(s) if different from the end user) has fully complied with all of the obligations under this Warranty and the Terms and

Conditions of Sale including, without limitation, payment in full in respect of the Products, at its sole option, will repair or

replace the Product(s) with the same or a functionally equivalent Product(s) or component part(s). Specifically, we will repair

the Product, replace with a similar or like Product (as determined by us in its sole discretion), or issue a credit to the

purchaser which may be used for future product purchases. (The amount of such credit shall be calculated by us at its

sole discretion). We reserves the right to use new, reconditioned, refurbished, repaired or remanufactured products or parts

in the repair or replacement of any

Summary of content (2 pages)

PAGE 1
LIMITED WARRANTY Limited Warranty (“Warranty”): Subject to the exclusions set forth below, warrants that (i) all manufactured products will be free from defects in material and workmanship which cause the Products to fail to operate in accordance with the specifications set forth in the documentation published or provided with the Products (the “Specifications”) for a period of one (1) year from the date of shipment (“Non-LED Warranty Period”) and (ii) all light emitting diode (“LED”) Products, will be free
PAGE 2
Product covered by this Warranty. This Warranty excludes any and all removal or reinstallation costs and expenses including, without limitation, labor and equipment required to remove and/or reinstall original or replacement Product(s) or parts, shipping costs to return nonconforming Products(s) or any damage that may occur during the return of any Product(s).