Instruction manual

7
2. Securing cable by using cable clips
Figure 3
Secure the cable from the motor to the switch assembly by using four cable clips – two are fixed on upper push
bar, the other two are fixed on lower push bar. See Figure 3
3. Mount the grass catcher bag
Before mounting the grass catcher bag, the motor must be switched off.
Figure 4 Figure 5
Figure 4
Raise the safety flap as far as possible and place the grass catcher on two hooks of the under deck. Always fit
the grass catcher bag on mower before connecting to the mains.
4. Adjusting cutting height
Stop, release the switch lever and wait until the motor stops before adjusting height. The blade
continues to rotate after the machine is switched off. A rotating blade can cause injury.
Caution , do not touch rotating blade.
Figure 5
For the first cutting of the season, a high cutting adjustment should be selected.,
The mower can be set to 6 cutting heights, between 25mm and 75mm. Press the height of cut lever inwards, then
lift or push down the mower until required height was selected.
Using the height of cut between 25mm to 35mm will further shorten the battery duration.