Specifications

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Surface-Mounted Installation
• Two Integral Mounting Bars
• Pre-Drilled Mounting Holes (4 typical)
• Housing/Body is Panel Style Construction (WD)
• Particle Board Construction with PVC Laminate
• MDF Back Panel
• Dowel/Glue & Tongue & Groove Construction
panels of housing by glue and tongue in groove or
glue and wooden dowels as a minimum.
• Mirror Doors (3 typical)
• Right-hand swing (2 typical) and left-hand swing (1
typical)
• Polished Edges, 4 sides
• Laminated Protective Mirror Backing
• Shelves, particle board with white PVC laminate (2 typical)
• Fixed, non-removable (FX)
• Chrome Finish Glass Pivot Hinges, set of two (3 sets typical)
• Spring-loaded, white magnetic touch latch fastened to cabinet
body aligns to chrome finished metal plate on the mirror door
back (3 typical)
• Includes Mounting Hardware
CARB 93120 Phase 2 Compliant for Formaldehyde
* All models and material specifications are subject to change or withdrawal without notice.
Finishes:
Housing: Classic White
Mirror: Polished Edge
Frame: Classic White
Dimensions In Inches
Description A B C D E F
MEDCAB 3DR 30X26 FMLS WD 30 26 4¾ 28½ 24-3/16 4
• Solid Wood Frame with Miter Cut Corners
• Solid Poplar with Classic White Finish
• The frame is attached to the top, bottom, and side