Owner manual

ManualsBrandsRCBS ManualsToolsQC Powder Measure

PRECISIONEERED RELOADING EQUIPMENT

We think that we make the very best reloading equipment in the world. If you

agree, please tell your friends. If you disagree, tell us we want to do something

about it!

Customer Service

1-800-533-5000 (US or Canada) or 530-533-5191

Hours: Monday - Thursday, 6:30am - 4:00pm Pacific Time

(hours may vary)

e-mail: rcbs.tech@atk.com or visit our website at www.rcbs.com

RCBS 605 Oro Dam Blvd. East, Oroville, CA 95965

ALLIANT POWDER - CCI - CHAMPION TRAPS & TARGETS

EAGLE - ESTATE CARTRIDGE - FEDERAL AMMUNITION

FUSION AMMUNITION - GUNSLICK PRO - NITREX - OUTERS

RCBS – RAMLINE - SHOOTERS RIDGE - SPEER – WEAVER

7200544/0411

QUICK CHANGE

POWDER MEASURE

WARNING: NOT FOR USE WITH BLACK POWDER!

PRODUCT INSTRUCTIONS

*Shown with optional Powder Baffle

– sold separately

Summary of content (6 pages)

PAGE 1
PRECISIONEERED RELOADING EQUIPMENT QUICK CHANGE POWDER MEASURE We think that we make the very best reloading equipment in the world. If you agree, please tell your friends. If you disagree, tell us we want to do something about it! Customer Service 1-800-533-5000 (US or Canada) or 530-533-5191 Hours: Monday - Thursday, 6:30am - 4:00pm Pacific Time (hours may vary) e-mail: rcbs.tech@atk.com or visit our website at www.rcbs.com *Shown with optional Powder Baffle – sold separately RCBS 605 Oro Dam Blvd.
PAGE 2
WARNING Before using the RCBS Quick Change Powder Measure, read these instructions carefully to fully learn how to safely operate the related reloading equipment. Failure to properly operate the related reloading equipment can result in severe personal injury and/or equipment damage. If you have any questions while assembling or operating this tool, Call us at 1-800-533-5000 or 1-530-533-5191 Monday – Thursday 6:30 am – 4:00 pm Pacific Time (hours may vary) Or email us at rcbs.tech@atk.
PAGE 3
Key# Description Part # Qty 1 UPM Main Casting II 7709025 1 2 QC Powder Hopper 7109025 1 3 QC Powder Hopper Cap 7189029 1 4 QC Measuring Cylinder 7798843 1 5 QC Metering Screw Large 7798854 1 6 QC Metering Screw Bushing Large 7798844 1 7 Metering Screw Lock Ring 7709014 2 8 Bow Washer 7109260 2 9 QC Metering Screw Small 7809008 1 10 QC Metering Screw Bushing Small 7798845 1 11 QC Drain Tube 7798852 1 12 Handle Assembly 7709027 1 13 Handle Screws 7109019
PAGE 4
• DO NOT store primers in bulk. The blast of just a few hundred primers is sufficient to cause serious injury to anyone nearby. • DO NOT force primers. Use care in handling primers. • DO NOT have more than one can of powder on the bench at one time. Powder cans should be stored away from the bench to avoid picking up the wrong one. • DO NOT use any powder unless its identity is positively known. The only positive identification is the manufacturer's label on the original canister.
PAGE 5
emptied without taking it off the bench or reloading press by using the provided Quick Change Drain Attachment. Dispense the remaining charge and hold the handle in the “up” position. Loosen the knurled Lock Pin Retainer, pull the Lock Knob and remove the Metering Screw Assembly. Align the Lock Pin hole on the side of the Drain Attachment and insert into the Metering Cylinder, release the Lock Knob. Try to rotate the Drain Attachment to insure that the Lock Pin is in place.
PAGE 6
TO USE Installing Locking Pin Now is the time to decide if you will be dispensing small pistol charges or larger rifle charges. The small Metering Assembly will dispense from .5-40 grains of smokeless powder. The large Metering Assembly will dispense from 10-110 grains of smokeless powder. You will notice a tapered hole on the side of the Metering Screw Assembly body, this is the locking point for the Quick Change Locking Pin.