User Manual

REPAIR AND MAINTENANCE
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
6
Using a 3 mm Allen wrench and with the scooter in the upright and locked position, adjust the set screw at the
baseboard until there is no free-play between the baseboard and the steering column. Be careful not to over-
tighten this screw as it need only be snug against the steering column. Verify the adjustment by releasing the
steering column from the locked position and folding the scooter. The joint lever should not bind and the folding
movement should be smooth. The spring-loaded mechanism should automatically lock and be fully seated in the
upright position.
Baseboard/Steering Column Adjusting Screw (A4 ONLY)
Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness, and bearings for side-to-side play, and loose parts. When a wheel or wheel bearing develops play, this is
an indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels.
Worn wheels/bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels
other than genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than
genuine Razor replacement parts may affect your safety and will void your warranty.
Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners.
For the complete selection of replacement parts visit shop.razor.com.
Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Additional Customer Service contact information is listed at the back of this manual.
Cleaning Your Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
WARNING: Wheelies and
other stunt-type riding reduces your
ability to maneuver and control
your scooter. Take the necessary
precautions, such as wearing
appropriate protective gear and
practice in a area safe for stunt
riding and free from obstructions.
WARNING: Keep fingers
clear of the pivoting mechanism
when folding or unfolding the
scooter (select models only).