Vario IP PoE Series Instructions

www.rayteccctv.com 9
Raytec Global Tel: [phone]
Raytec Americas Tel: [phone]
Factory Defaults
Name
VARIOIP
Group Name
<Deliberately Left Blank>
IP Address
192.168.2.80
Enable DHCP Checkbox
Not Selected – IP addresses will NOT be automatically
allocated. If lamp is being operated on a DHCP enabled
network, DHCP can be selected for automatic allocation of
IP address.
Local
(No VMS server)
selected to enable operation of lamp using integrated web
interface.
If lamp is to be operated using VMS or other control system
then this option should NOT be selected.
Photocell
External Input
Trigger Control
Lamp Control
Lamp Control
Respond to Group
Commands
No, ignore group command
No, ignore group command
Lamp Mode on Trigger
On
On
Power (%)
100%
100%
Duration
All night
Duration of Input
Soft Start
On
Off
Deterrent
Pattern = SOS
Frequency = Slow
Manual Override
Countdown Duration = 30 mins
Advanced Settings
External Input
Type of Input = Volt Free
Active State = Short Circuit/Low
External Output
Trigger State = Photocell Only
Active State = Short Circuit/Low
Photocell Sensitivity = 20 lux