Vario IP PoE Series Instructions

www.rayteccctv.com 13
Raytec Global Tel: [phone]
Raytec Americas Tel: [phone]
After the change has been made save the edited names by pressing “OK”.
The selected unit name and group has now been changed. Refresh the Discovery
Application by pressing “Discover” and the updated information should be displayed.
Lamp Status
The Discovery Application has two status indicators for each lamp. The colours of these
indicators change depending on the state of the lamps as described below:-
Red
Green
Grey
State
Lamp Fault
Lamp OK
No communication
On/Off
N/A
Lamp On
Lamp Off
A lamp fault is indicated if:-
1. An LED fault exists within the lamp.
2. The input voltage is outside specified limits.
Other Information
The Discovery Application does not automatically refresh, therefore to view any changes it is
important that the page is refreshed - using function key “F5” or by pressing “Discover”.
When changes are made to a lamp or a new lamp is added there may be a small delay in
making contact or updating the information and so “Discover” may need to be pressed more
than once.