Vario IP PoE Series Instructions

www.rayteccctv.com 10
Raytec Global Tel: [phone]
Raytec Americas Tel: [phone]
Connecting to the Network
Basic
Assign an IP Address
Most networks today have a DHCP server that automatically assigns IP addresses to
connected devices. If your network does not have a DHCP server, the VARIO IP Lamp will
use 192.168.2.80 as the default IP address. Raytec’s Discovery Application is the
recommended method for changing an IP address. This free application is available on the
USB Memory Stick supplied with the product or please contact Raytec to supply the latest
version.
See page 6 for how to change the IP address of lamp using the Discovery Tool.
Note: - If assigning the IP address fails, check that there is no firewall blocking the operation
and that the computer and lamp have IP addresses in the same range.
Advanced
Accessing the lamp from the Internet
Once installed, your Network Lamp is accessible on your local network (LAN). If you wish to
access via the internet, please contact your IT specialist.
Discovery Application
The Raytec Discovery Application will discover and display all VARIO IP Lamps on your
network. Load The Discovery Tool Application from the USB provided (or contact Raytec for
a copy) onto a computer on the same network as the lamp. Run the application and press
“Discover”.
The Raytec Application allows you to:-
 Navigate directly to each lamp
 Change Network Settings