User's Manual

mn100 Digital Display
18
3.4 Setup Page Description
Memory Chapter
In each case press the button quickly to reset.
(s1) TRIP
The Distance travelled since the last Trip Reset. Resets to
0.00.
(s2) DEPTH MINIMUM
The Minimum Depth encountered since switch on or since
the last Minimum Depth Reset. Resets to current depth.
(s3) DEPTH MAXIMUM
The Maximum Depth encountered since switch on or since
the last Maximum Depth Reset. Resets to current depth.
(s4) SPEED MAXIMUM
The Maximum Speed attained since switch on or since the
last Maximum Speed Reset. Resets to current boat speed.
(s5) SPEED AVERAGE
The Average Speed attained since switch on or since the
last Average Speed Reset. Reset to current boat speed.
Units Chapter
In each case press the button quickly to edit, press the
or to change units and press the button quickly to select
the chosen units. Default values are indicated in bold.
(s6) SPEED
Sets the units in which ALL Speed related information is
displayed. Knots, Kilometers per hour (KPH) or Statute
Miles per hour (MPH).
(s7) DEPTH
Sets the units in which ALL Depth related information is
displayed. Feet, Meters or Fathoms.
(s8) WIND
Sets the units in which ALL Wind Speed related
information is displayed. Knots or Meters per second
(M/S).
Setup and Calibration
19
(s9) LOG
Sets the units in which ALL Distance related information is
displayed. Nautical Miles (NM), Kilometers (KM) or
Statute Miles (SM).
(s10) TEMP
Sets the units in which water temperature information is
displayed. Degrees Celsius (
0
C) or Degrees Fahrenheit
(
0
F).
Alarms Chapter
In each case press the button quickly to edit, press the or to
change values and press the button quickly to save the entered
value. In the case of On/Off selection the button will toggle the
setting On and Off.
(s11) DEPTH SHALLOW
Sets the Shallow Depth at which the instrument will alarm.
OFF and 0.0 to 25.0 feet (0.0 to 7.6 meters) (0.0 to 4.1
fathoms). Values are displayed in the previously selected
units (see page 18 -s7) and are all subject to any keel or
waterline offset added (see page 24). This alarm sounds
as the depth passes below the set value and NOT as the
depth increases past this value.
(s12) DEPTH DEEP
Sets the Deep Depth at which the instrument will alarm.
OFF and 0.0 to 250 feet (0.0 to 76.2 meters) (0.0 to 41.6
fathoms). Values are displayed in the previously selected
units (see page 18 -s7) and are all subject to any keel or
waterline offset added (see page 24). This alarm sounds
as the depth increases past this value or decreases past
this value.
(s13) WIND HIGH
Sets the Wind Speed at which the instrument will alarm.
OFF and 0.0 to 100 knots (0.0 to 51.4 m/s). Values are
displayed in the previously selected units (see page 18 -
s8). This alarm sounds as the wind speed increases past
the set value and NOT as it decreases past this value.
(S14) XTE LARGE
Sets the instrument to alarm if a Large Cross Track Error
Alarm is issued by the GPS. On/Off.