User Guide English (3–19) Guía del usuario Español (20–38) Guide d'utilisation Français (39–57) Guida per l'uso Benutzerhandbuch Appendix Italiano (58–75) Deutsch (77–95) English (97–98) Powered by Serato DJ Pro
User Guide (English) Introduction Thank you for purchasing the Seventy. At Rane DJ, we know how serious music is to you. That’s why we design our equipment with only one thing in mind—to make your performance the best it can be.
Setup Items not listed under Introduction > Box Contents are sold separately. 1. Visit rane.com and log into your account. (Create an account if this is your first Rane product.) In your account, register your Seventy and download the Rane Control Panel. Windows users only: The Rane Control Panel contains drivers required for Windows. 2. IMPORTANT: Occasionally, we may update Seventy’s firmware to improve its performance. Visit rane.
Features Top Panel 1 2 4 3 35 30 7 31 6 38 18 9 10 8 16 8 19 21 4 2 3 5 32 9 33 34 18 10 20 17 17 22 22 15 1 7 5 36 37 6 15 13 13 14 23 14 11 24 12 28 25 28 27 27 26 29 5
1. Scroll/Load: Turn this knob to browse through lists and press it to select an item or load the currently selected track to the deck. 2. Back: Press this button to view the previous screen in Serato DJ Pro. Tip: Press this knob twice quickly to load the same track to both decks (“instant doubles”). Hold Shift and press this button to cycle through the Files, Browse, Prepare, and History windows in Serato DJ Pro. 3.
18. FX Buttons: Use these buttons to select or deselect effects for activation by the Effects Toggles. 19. FX Mode Button: Use this button to determine whether the FX Buttons select Seventy’s internal Flex FX or software effects. While in Flex FX Mode, the FX Mode Button will be lit blue. While in Software Effects Mode, the button will be lit amber. 20. FX Joystick: Push this joystick up and down or left and right to navigate effect parameters and menu settings shown on the Display. 21.
Rear Panel 8 14 13 9 8 11 12 9 2 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 8 11 12 3 3 4 6 5 10 7 Power Input: While Seventy is powered off, connect the included power cable to this input and then to a power outlet. Power Switch: Use this switch to power Seventy on or off. Power on Seventy only after you have connected all of your input devices and before you power on your amplifiers and loudspeakers. Power off your amplifiers and loudspeakers before powering off Seventy.
Front Panel 8 2 5 3 7 6 7 1 10 4 9 1. Headphone Outputs (1/4”, 1/8” / 6.35 mm, 3.5 mm, TRS): Connect your 1/4” or 1/8” (6.35 mm or 3.5 mm) headphones to this output for cueing and mix monitoring. 2. Mic 2 On: When set to On, the Mic 2 Input on the rear panel is active, and its audio signal is routed directly to the program mix and cue mix. When set to Off, the Mic 2 Input is disabled. 3. Mic 2 Level: Turn this knob to adjust the gain of the Mic 2 Input. 4.
Operation Looping Each deck on the Seventy is equipped with three buttons on the top panel that you can use to easily create and modify loops. Each button has a primary function (printed above the button) and a secondary function (printed below the button). To activate an autoloop of a track playing on a deck, press the deck’s Loop On/Off (Reloop) button. The length of the loop in bars will depend on your software’s current loop size setting.
Applying Effects to a Deck To activate software or internal effects on a deck, use the deck’s Effects Toggle. Latch the toggle in the up position to apply effects to a deck. Alternatively, you can pull the toggle down and then let go in order to momentarily apply effects to the deck. To deactivate software or internal effects on a deck, place the deck’s Effects Toggle in the center position. To select or deselect which effects will be activated by the Effects Toggles, press the FX buttons.
To edit a deck’s FX beat division, push the FX Joystick up or down while the deck is in focus on the Display. Use this setting to adjust the rhythmic timing of a deck’s effect(s) in accord with the FX tempo. By default, the available beat division settings for the Flex FX range from 1/32T (32nd note triplet) – 32D (32 bars dotted), while the beat division settings for Serato DJ Pro effects range from 1/16 (16th note) – 8 (8 bars).
Pad Modes This chapter describes the different pad modes. Each deck has eight pads, which are always in one of these modes, and each deck’s pads can be in a different mode. Press one of the Pad Mode buttons to enter the corresponding pad mode on that deck. With each press, a Pad Mode button will alternate between a primary and secondary pad mode. When you enter a primary pad mode, the corresponding Pad Mode button will be lit with its primary color.
Saved Loop In Saved Loop Mode, each pad triggers a loop previously saved in your software. Saved Loop 1 To enter Saved Loop Mode, press Saved Loop so that it lights dark blue. To play a loop, press a lit Pad. Each deck’s eight pads will correspond to Saved Loops 1–8 in your software, and the color of each pad will correspond to the color assigned to each loop in your software.
Sampler In Sampler Mode, the pads will control the sampler in the software. The pads each trigger a sample at a specified volume (you can assign the sample and its volume in the software). To enter Sampler Mode, press Sampler so that it lights purple. To assign a sample, first highlight the desired sample in your library. Then hold Shift and press a pad corresponding to an empty sampler slot. The sampler slot volume can be adjusted in Serato. To play a sample, press a lit pad.
Custom Pad Sets Seventy comes with two customizable pad modes. For these modes, you can use Serato DJ Pro’s MIDI mapping feature to program the Performance Pads to trigger functions of your choosing. To enter a custom pad mode, press either Roll or Transport so that the button lights red. Note: You may need to set Pad > User Modes to On in the Main Menu, which you can access by holding Shift and pressing Tap (see the Main Menu section of this manual for more help navigating the settings).
Menu Options The Main Menu contains the following pages and options: Settings: Select this page to adjust settings for some of the mixer’s audio controls: • • • • • Audio: o Main Out: Determines whether the main mix is in stereo or mono. o Mix Pan: Controls the left-right balance of the main mix signal. Deck 1 and Deck 2: o PH Sens (Phono Sensitivity): If connecting a turntable to a deck’s PH/CD In, use this setting to make sure that the turntable functions optimally with Seventy.
• o Instant Dbls: Select this option to determine the default mode for each deck’s Instant Doubles button: o Normal: In this mode, press the button to load the deck’s track to the other deck. o Sync Mode: In this mode, press the button to automatically sync the deck’s tempo with the other deck. Hold Shift and press the button to deactivate sync. o Silent Cue: In this mode, press the button to mute the deck.
Control Panel The Rane Control Panel allows you to adjust settings on your Seventy mixer and save and load these settings to a file (.r72) on your computer. Using settings files lets you maintain several different control configurations to use in different situations. To manage settings files, navigate to the Settings section of the Rane Control Panel, under the General tab. • Load: Select this to locate and load a Seventy settings file (.r72) on your computer to the Control Panel.
