Use and Care Manual

Page 1 of 2Customer Service Help-Line 800.272.4647 RainguardPro.com
Application
Non-Porous Metallic Surfaces
On previously painted surfaces, polished metal,
stainless steel, aluminum, or any other type of
non-porous surface, spray VandlClean™ Super
Grafti Cleaner directly to the affected surface,
and allow to remain until grafti begins to dissolve.
Wipe the surface clean of the grafti.
Non-Porous Painted Surfaces
On painted surfaces, remove grafti in small
sections to ensure that the grafti remover does
not damage the surface. In a case where the
grafti remover dissolves the underlying paint,
immediately neutralize the cleaned area with
water. Use a clean section of the rag to remove
any remaining grafti residue once the majority of
the grafti has been removed. Always wash the
surface with water to neutralize the grafti cleaner
when the job is completed.
Porous Surfaces (Brick or Concrete)
For brick or concrete surfaces, use a stiff brush to
apply the grafti remover into the porous surface.
Apply the product liberally and work the product
into the porous surface using a twisting motion
of the brush. Allow the product to seep into the
surface for a minimum of 20-30 minutes, then
test to see if grafti is dissolving. If grafti has
dissolved, you may use high-pressure water to
wash the grafti from the surface. If a pressure
washer is not available, we recommend washing
(scrubbing) the treated surface with warm water
and an industrial-grade degreaser or soap. Rinse
with fresh water when nished.
Do not use high pressure water; damage to
surface of substrate. May result. If all of the
grafti is not removed in the rst attempt,
perform a second application when dry. We
recommend room temperature/warm water
(21°c-65°c / 70°f-150°f). Steam or hot water
may damage the surface or grouted areas.
VandlClean
™
Super
Grafti Cleaner
technical data sheet
Tough and Durable Grafti Remover
VandlClean
™
Super Grafti Cleaner
Description
VandlClean™ Super Grafti Cleaner is an
environmentally-friendly, biodegradable grafti
remover designed to dissolve spray paint,
marker, pen, pencil, ink, or glue. It is 100% water
neutralized (neutralized with water) and is safe
for use near waterways, rivers, canals, and
reservoirs. VandlClean™ Super Grafti Cleaner is
a citrus based, pleasantly-scented, concentrated
cleaner and degreaser designed for a wide range
of cleaning chores on any surface not harmed
by water alone. Natural orange extracts coupled
with biodegradable surfactants, dirt-suspending
agents, and builders produce a formidable cleaner
for everyday applications. When compared with
other name brand products and other commonly
used hard surface cleaners, VandlClean™
Super Grafti Cleaner demonstrates conclusive
proof that citrus performs more efciently and
effectively. It is suitable for removing grafti from
brick, cement, wood, or any porous surface.
VandlClean™ Super Grafti Cleaner may damage
PVC surfaces (plastics), so it is recommended
that a small area be tested prior to use. It is
always best to use this cleaner in combination
with VANDLSYSTEM™ grafti-resistant barrier
coatings made by Rainguard®.
Coverage
Coverage of the remover will vary depending
on how heavily the grafti is painted on the
surface. Multiple applications may be required to
completely remove grafti. Allowing the product
to remain in place long enough will maximize the
coverage of the remover.
Mixing
DO NOT DILUTE. VandlClean™ Super Grafti
Cleaner is 100% biodegradable and neutralized in
water. Water will neutralize the cleaner, making it
ineffective. Once grafti removal is complete, the
surface should be thoroughly washed down with
water to neutralize any remaining active product.
Description U/M Code
VandlClean™ Super Grafti Remover 32 Ounce VG-7300
VandlClean™ Super Grafti Remover 1 Gallon VG-7301