Instructions / Assembly

ManualsBrandsRAIN GUARD ManualsPaint5-gal. Wood and Masonry Waterproofer 7 year

RECOMMENDED USES:

 Masonry block

 Concrete

 Stucco

 EFIS or cement plaster

 May be used on composite construction with a

variety of substrates.

 Wood Surfaces

 Recommended for both horizontal and vertical

surfaces

 Oil, gas and brake fluid repellent

COVERAGE RATES (THEORETICAL):

Substrate ___ Sq Ft/ Gallon

CMU Precision Block 60-70

Split Faced 50-70

Scored/Fluted 65-80

Lightweight 40-55

Clay Brick 125-150

Stucco 100-150

Dense Masonry Surfaces 125-150

Adobe Block 70-90

Clay Block 50-60

EFIS 80-120

Wood 300

 Extremely porous surfaces may require multiple

coats.

Guarantee Period: 7 Year Limited

Part Numbers: USA International

1 Gallon TPC-0110 TPC-0110-CA

5 Gallon TPC-0111 TPC-0111-CA

Waterproofer for Wood

and Masonry

100% PENETRATING WATER REPELLENT WITH MICRO-

LOK®

PRODUCT DESCRIPTION

WATERPROOFER Ready to Use is a solvent free, 100% active solid,

repellent. Requiring no dilution and ready to use, WATERPROOF-

ER self emulsifies to form a high performance and deep penetrat-

ing, alkali resistant water repellent emulsion. When applied, WA-

TERPROOFER forms a long-chain water repellent barrier deep

within the masonry surface. This hydrophobic barrier repells

water yet remains highly vapor permeable and allows moisture to

escape. WATERPROOFER performance is not affected by weath-

ering, UV light or wind driven rain.

MICRO-LOK creates a micro-molecular chemical and mechanical

bond between the water-repellent chemicals and the substrate.

WATERPROOFER penetrates deep into the applied surfaces to

provide long lasting and virtually indestructible water repellent

protection that is not affected by weather or sunlight. Helps pre-

vent spalling and cracking caused by freeze thaw cycles. Helps

prevent chloride ion intrusion and efflorescence. This material is

Ready To Use - Do Not Dilute.

PRODUCT FEATURES

1. Exclusive MICRO-LOK formulation

2. Mold and mildew inhibitor

3. Protection not affected by weathering or UV light

4. Single or multiple coat application

5. V.O.C. compliant

6. Contains no known carcinogens

7. Maintenance free

8. Breathable – does not trap moisture

9. Can be used in cold temperature applications

10. Will not yellow

Summary of content (2 pages)

PAGE 1
Waterproofer for Wood and Masonry 100% PENETRATING WATER REPELLENT LOK® WITH MICRO- PRODUCT DESCRIPTION WATERPROOFER Ready to Use is a solvent free, 100% active solid, repellent. Requiring no dilution and ready to use, WATERPROOFER self emulsifies to form a high performance and deep penetrating, alkali resistant water repellent emulsion. When applied, WATERPROOFER forms a long-chain water repellent barrier deep within the masonry surface.
PAGE 2
PRECAUTIONS & LIMITATIONS FOLLOW THESE SIMPLE STEPS All surfaces to be coated shall be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar and mold and mildew, etc. All cracks shall be pointed or caulked.