User's Manual

14 US Customer Care Center 1-800-732-2677

To Pair the Remote Transmitter and Receiver Collar

If your Receiver Collar does not beep when the Tone Button of the Remote

Transmitter is pressed, or if you feel the Receiver Collar is not responding

to the Remote Transmitter, follow these steps to pair:

1. Start with the Receiver Collar off your pet and powered off.

2. Press and hold the On/Off Button until the green LED light shuts off.

When the green LED shuts off, release the On/Off Button and the

Receiver LED will ﬂash green.

3. Place the Transmitter into pairing mode by pressing the down (-) button

until the Digital Display shows P.

4. Press the Tone and Stimulation Buttons simultaneously (the orange LED

should be lit) until the collar beeps twice, indicating it has learned the

Transmitter ID.

5. Change the level to 1 Low by pressing the up (+) button on the transmitter and then press the

Tone Button. The Receiver Collar should emit a tone, verifying that it is paired with the transmitter.

6. If the Receiver Collar does not respond, please contact the Customer Care Center.

Step