- RadioShack Scanner User Manual

The Basics

step 2: power your scanner

from a wall outlet

1. Connect the tip of the supplied AC adapter to the DC 12V

jack at the rear of your scanner.

2. Plug the AC adapter into your wall outlet.

You must use a Class 2 power source that supplies 12V

DC and delivers at least 500mA. Its center tip must be set

to positive and its plug must ﬁ t the scanner’s DC 12V jack.

Using an adapter that does not meet these speciﬁ cations

could damage the scanner or the adapter.

To prevent electric shock, do not use the AC adapter’s

polarized plug with an extension cord, receptacle, or

other outlet unless you can fully insert the blades to

prevent blade exposure.

through your vehicle’s ignition (negative

ground only)

If you are not experienced in connecting accessories to

the vehicle fuse box, use a certiﬁ ed installer.

1. Disconnect the cable from the negative (-) terminal of

your vehicle’s battery.

2. Ground the black wire of the

supplied DC power cord to

your vehicle’s chassis.





Rear View

Note

Notes