Hardware manual

Digital BUS-WATCH
®
PC Software Manual
Radio Engineering Industries, Inc.
640372 - Rev C - 11/10/2009
Page 8 of 75
Window View selection box
Window configurations displaying 1, 4, 6, 8, 9, 10, 13, or 16 video windows
simultaneously can be selected using the selection box. Upon selection of a window
configuration, the video windows in the viewing area of the interface are rearranged to
provide the selected number of video windows.
Regardless of configuration, a total of 16 video windows are available for viewing.
Video windows in window configurations, which display less than 16 video windows
simultaneously, are arranged in pages.
The video window page currently displayed in the viewing area is selected using the
Previous Page and Next Page selections on the BUS-WATCH® Live View Window
View selection box. Selecting Next Page will result in the next page of video windows
being displayed, and selecting Previous Page will result in the previous page of video
windows displayed in the viewing area.
In typical use, when viewing live video from a single DVR, the window configuration
will be set to the number of cameras of the selected DVR. In this case, 1 Window should
be selected for a single R1001 Mobile DVR, 4 Windows selected for a R4001 Mobile
DVR, and 8 Windows selected for a R8001 Mobile DVR.
Window configurations can be changed using the View control at any time before or
during viewing, regardless of the number of cameras and/or DVRs. Selecting an exact
window configuration for a specific DVR is not required, but it is advised to select a
window configuration with at least four video windows when connecting to an R4001
Mobile DVR so that video windows for all four cameras are displayed.
DVR Information Display
Additional information from the source DVR of the selected channel is displayed at the
bottom of the viewing area when an extra Window (one more than video channels)
window configuration is selected from the View selection box.