Hardware manual

Digital BUS-WATCH
®
PC Software Manual
Radio Engineering Industries, Inc.
640372 - Rev C - 11/10/2009
Page 50 of 75
To perform remote operations on a DVR, select the DVR from the list of DVRs, and
click the Connect to DVR Button located below the DVR list pane.
The BUS-WATCH® Live view application will establish a network connection to the
selected DVR, if available. Note: The selected DVR must be powered on and connected
to the network to perform remote operations on the DVR.
Upon successful connection to the selected DVR, a success message will be displayed
below the Connect to DVR Button, and a list of operations, which may be performed on
the remote DVR, will appear in the right pane of the dialog box. If a connection cannot
be established to the selected DVR, an error message will be displayed.
Remote Control Dialog Box
To perform an operation in the operation list, double-click the operation in the list, or
select the operation and click the Remote Control Button located below the operation
list.
A description of each option is provided below:
Restart Device
The Restart device function is used to restart a network connected DVR.