Instructions / Assembly

3902 West Sample Street • South Bend, IN 46619
Tel: [phone]
• Fax: [phone]
KWIK-BRACE
®
INSTALLATION
INSTRUCTIONS
Ceiling Fan/Light Fixture Support Brace
GENERAL INSTRUCTIONS
• Turn off all power before beginning installation.
• Use care in installation to avoid knots in wood, truss plates on
trusses, as well as existing electrical wires, plumbing heating
ducts and gas lines. Visually inspect area before installing brace!
• Use only the hardware supplied to mount outlet box and
fan/fixture bracket and brace.
• Wiring must meet local and national codes.
• Use disposable steel dust cover as protection plate for mudding/
painting operation. Cover will protect wiring while router is used
to cut drywall.
• RACO's new construction KWIK-BRACE and outlet box
combinations are UL listed for the following support:
Ceiling fans: Not in excess of 70 lbs.
Lighting fixtures: Not in excess of 90 lbs., 24" span.
Not in excess of 210 lbs., 16" span.
RACO
RACO
INSTALLATION
Step 6 - Install fan or light fixture:
A. Mount fan/fixture to box using only those screws provided with KWIK-BRACE
®
.
B. Use 10-32 screws if mounting a fan, or fixture over 50 lbs. Use 8-32 (not provided)
screws if mounting a light fixture.
C. Follow fan or fixture manufacturer's wiring instructions. Green #10-32 ground
screw is provided for grounding box fan/fixture.
RACO
®
KWIK-BRACE
®
For New Construction
RACO
®
Part #
926, 926-1, 926C, 926X, VQH1
Description
4" Round Box, 1-1/2" Deep
Ceiling Fan (lbs.)
Max. Recommended Support Loads
24" Span
90
24" Span
70
16" Span
210
16" Span
70
Fixture (lbs.)
PN 119142
RA-321 rev 3 Instr
U.S. Patent No’s. 7,148,420, 7,191,994
6,332,597, and 6,098,945
MADE IN CHINA