User's Manual
TEX30LCD/S
ELETTRONICA
37 / 44
User Manual
Rev. 2.1 - 26/06/19
8.4.2 How to replace the RF module
• Open the top cover of TEX30LCD/S by unscrewing all the screws.
• Identify the RF module to be replaced.
• Unscrew all the points A with the help of an Allen screwdriver.
A
• Unscrew the RF connector B and disconnect the connector C.
c
B
• Remove the RF module and replace it with a new spare part.
• Redo all previously steps, performed in reverse, in order to reassemble and fix
the module in place.
• Put the cover back on and tighten all the screws necessary to close it.
8.4.3 How to replace the main board
• Open the top cover of TEX30LCD/S by unscrewing all the screws.
• Identify the module to be replaced.
• Unscrew the seven screws A on the rear panel of the TEX30LCD/S.