User Manual

RSP-APA-002
User’s Manual
R-tron., Inc. 19/34 page
4.4.6 Installing AC power cable
4.4.6.1 General Condition
- Using compressed outlet, power cable outlet should be installed. Avoid voltage down as
the result of connection resistance between repeater outlet and main power.
4.4.6.2 Installing AC power cable
- Main cable is composed of a rectifier, AC & DC power.
Repeater input power is AC and output power is DC.
- After putting AC power cable(CV 5.5mm² x 2C) into flexible Conduit(22mm) and then
installed it.
Figure 4.7 Flexible Conduit End Fitting
4.4.6.3 AC Power Box Installation
- AC power box input and output main power should be connected with terminal outlet
which is inside AC power box.
- AC Power Box should be installed firmly upper side in the repeater, isolating
11.81 inches