Installation Sheet
2of2
2016 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
DD
GG
II
EE
FF
HH
HH
Fixture
Loop
Supply
Wires and
Ground Wire
Figure 4
STEP 4 - Making the Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into outlet box.
Note: If the electrical wire is going to be cut shorter than provided
you will need to identify the "L" line wire and the "N" neutral wire
before you cut the excess wire off. One is labeled N and the other
labeled L. To do this separate the "L" line wire and the "N" neutral
wire as far as you need to. Re-label the wire near where you want to
make the cut. Be sure to mark the wire on the side of the fixture and
not on the excess wire being cut and removed.
Figure 5
Ribbed side of wire from fixture
identified with the Label “N”
Smooth side of wire from fixture
identified with the label “L”
White wire
from outlet box
Black wire from
outlet box (or Red)
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
E. Go to Step 5 for wire connections
and follow the directions. Return
to Step F in this step when
complete with Step 5.
F. Raise the Ceiling Canopy (II) and
Canopy Lock Ring (FF) up the
Fixture Chain (GG) and over the
Canopy Chain Loop (EE). Tighten
the Canopy Lock Ring (FF) onto
the Canopy Chain Loop (EE) until
tight.
Suggested chain length for
Ceiling height :
8’ ceiling : use 3 links of chain and
2 quick links
9’ ceiling : use 13 links of chain
and 2 quick links
10’ ceiling : use 23 links of chain
and 2 quick links
QF3395GF
FINISH: GOLD FINCH
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
H
STEP 5 Install Bulbs
IMPORTANT:
-
A. Insert bulbs (H) into sockets and
push snugly into place.
Do not touch the
bulb with bare hands use a cloth
or glove.
A2
A2
C2
A1
A1
C1
B1
A2
B2
A2
B2
A2
B2
A2
A2
C2
A1
A1
C1
A2
A2
C2
A1
A1
C1
A2
A2
C2
A1
A1
C1
A2
A2
C2
A1
A1
C1
A2
A2
C2
A1
A1
C1
A2A1
B2B1
A2A1
B2B1
A2A1
B2B1
A2A1
B2B1
A2A1
B2B1
A2A1
B2B1
A1
B1
A2A1
B2B1
A2A1
B2B1
A2A1
B2B1
A2A1
B2B1
A1
B1
A2
B2
A1
B1
A2
B2
A1
B1
A2
B2
A1
B1
A2
B2
A1
B1
A1
B1
A2
B2
A1
B1
A2
B2
A1
B1
A2
B2
A1
B1
A2
B2
A1
A2A1
B2B1
A2
B2
A1
B1
STEP 6 Install Glasses-
A. Refer to Glass Distribution to
identify the suggested hanging
locations of Clear Glass
A1/B1/C1 (B/D/F)and Amber
Glass A2/B2/C2 (C/E/G).
GLASS DISTRIBUTION
Figure 6
Your fixture is now assembled and
ready to use. Enjoy!
17.5” Dia.
5" Dia.
14"
72” OVERALL
HEIGHT INCLUDES
48” CHAIN AND
2 QUICK LINKS
(
)
ReleasedDate:2017-09-07