Installation Sheet

ManualsBrandsQuoizel ManualsWall SconcesQuoizel Darius Single Light 15" Tall Outdoor Wall Sconce

Package Contents

Warnings and Cautions

1of3

For Style DRS8409EK

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Crossbar

Assembly

Pleasegoto forproductcleaningtips.Gotothe selection.

(1)A19MediumBaseBulb100WMaximum,MediumBaseVintageBulbisrecommended,bulbnotincluded.

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssembly Time:

Preparation:

Fixturecanonlybemountedinthedirectionindicatedonpage2.

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

Installation Guide #IS-DRS8409EK

2019 QuoizelInc.

ReleasedDate:2019-03-15

visit us on-line at www.quoizel.com

Alternate

Mounting screw

Fixture Body

Tab

Glass Panel

STEP 2 Install Bulb-

A. Insert the bulb onto the socket

and screw snugly into place.

Socket

Vintage Bulb

(recommended

but not included)

Figure 2

STEP 3 Install Glass Panels-

A. Place the Glass Panel (D) into the slot

in the bottom edge of the cage. Secure

the Glass Panel (D) by pressing the

Tab (C) onto the top edge of the Glass

Panel (H) and the slot on the top edge

of the cage.

Slot

Figure 3

STEP 4 Install Cage and Arm to

Fixture Body

A. Place the cage over the bulb, attach

to the fixture hood on the Fixture

Body (E) and secure with previously

removed screws. Hand tighten until

snug with screwdrivers.

B. Place bolts on the bottom end of the

arm to holes on the bottom edge of

the cage and secure with previously

removed lock balls. Hand tighten

until snug.

Figure 4

Bolt

Hole

STEP 1 Remove Arm and Cage-

A. Unlock lock balls in the bottom edge

of the cage and remove the arm from

the Fixture Body (E).

B. Unscrew screws on the top edge of

the cage and remove the cage from

the Fixture Body (E).

Arm

Screw

Cage

Lock Ball

Figure 1

Cage

Arm

Screw

Cage

Lock Ball

Summary of content (3 pages)

PAGE 1
Installation Guide #IS-DRS8409EK For Style DRS8409EK Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (1) A19 Medium Base Bulb 100W Maximum, Medium Base Vintage Bulb is recommended, bulb not included. Estimated Assembly Time: 20-30 minutes Preparation: Identify and inspect all parts before beginning installation.
PAGE 2
STEP 5 - Installing the Crossbar Assembly STEP 8 - Install the Fixture Body A. Pass the supply wires through the Crossbar Assembly (A). Attach the Crossbar Assembly (A) to the outlet box with the head of the green ground screw facing you. Secure the Crossbar Assembly (A) with outlet box screws (not included). Tighten until snug . Note: Use the Alternate Shorter Mounting Screw (B) if your installation requires a shorter mounting screw. A.
PAGE 3
DRS8409EK NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" FINISH: EARTH BLACK 9” 9.25” 5.5” 14.5” Fixture can only be mounted in the direction indicated 5” Dia. 2019 QuoizelInc. visit us on-line at www.quoizel.