Installation Sheet

ManualsBrandsQuoizel ManualsChandeliersQuoizel Audley 3 Light 18" Wide Chandelier

1of3

For Style ADY5003OZ

Pleasegoto forproductcleaningtips.Gotothe selection.

(3)B10CandelabraBaseBulbs60WMaximum,bulbsnotincluded.

MinimumHangingHeightis19.25”,MaximumHangingHeightis75.25”.

30-45minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care+Maintenance

LightSource:

FixtureHangingHeight:

EstimatedAssemblyTime:

Preparation:

ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

Note:This CONVERTIBLEfixturecanbemountedassemi-flushlightorchandelierlight.Refertorespective

installationsteps forinstallations.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Package Contents

Crossbar

Assembly

Installation Guide #IS-ADY5003OZ

2018 QuoizelInc.

ReleasedDate:2018-09-12

visit us on-line at www.quoizel.com

Fixture Chain

Quick Link

Fixture Loop

Metal Plate

Ceiling Canopy

with Stem

Spacer Tube

Decorative Part

Decorative Finial

Shade

Fixture Body

Assembly Instructions for Semi-flush Light

(Step 1A - Step 6A)

Nipple

(Extra Parts include)

The following parts will not be used in the assembly of the Semi-

Flush Light fixture. Please set aside these parts.

Fixture Loop

Metal Plate

Fixture Chain

Quick Link

Decorative Part

Nipple

STEP 1A - Install Spacer Tube, Ceiling

Canopy with Stem and Decorative Finial

A. (Refer to

) Unfold support arms to

proper locations.

B. Thread the Decorative Finial (J) onto the

bottom center of the Fixture Body (L) and

hand tighten until snug.

C. Place the Spacer Tube (H) over the stem of

the Ceiling Canopy with Stem (J) and

thread the stem onto the hex coupling on

the top center of the Fixture Body (L). Hand

tighten until snug.

SUPPORT ARMS

DISTRIBUTION

SUPPORT ARMS DISTRIBUTION

Support Arm

Figure 1A

Summary of content (3 pages)

PAGE 1
Installation Guide #IS-ADY5003OZ For Style ADY5003OZ Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (3) B10 Candelabra Base Bulbs 60W Maximum, bulbs not included. Fixture Hanging Height: Minimum Hanging Height is 19.25”, Maximum Hanging Height is 75.25”.
PAGE 2
STEP 2A - Install Crossbar Assembly STEP 5A - Install the Ceiling Canopy A. Attach the Crossbar Assembly (A) to the Outlet Box with the head of the Green Ground Screw facing you. Secure it with Outlet Box Screws (not included). Tighten until snug. A. Carefully tuck all wires into the outlet box and position the ceiling canopy over the outlet box. Align the holes in the ceiling canopy with the mounting screws, then attach the ceiling canopy using the previously removed mounting balls.
PAGE 3
ADY5003OZ STEP 2B - Install Fixture Loop and Metal Plate to Stem B A. Place the previously removed decorative part on Step 1B and the Metal Plate (C) back onto the stem and secure with one Fixture Loop (B). Hand tighten until snug. B. Go to Step 1A to install Spacer Tube, Fixture Body and Decorative Finial. FINISH: OLD BRONZE C Decorative Part SEMI-FLUSH LIGHT 4.75” Dia. 5” Dia. Stem 5” Figure 2B 19.25” STEP 3B - Install Ceiling Canopy, Decorative Part and Fixture Loop Hex Nut Washer A.