QT Series Model QT -10 QT-10 Parts Manual Record of Change 200 This manual contains important safety information and must be made available to all personnel who operate and/or maintain this product. Carefully read this manual before attempting to operate or perform maintenance on this compressor. Fill Out & Return Warranty Registration Card Located Inside Manual No.
This manual provides information for the Model QT-10 reciprocating compressor, per Record of Change 200. TABLE OF CONTENTS Recommended Spare Parts ...................................1 Gasket Set ...............................................................1 The Model QT-10 is an aircooled, two stage, two cylinder, splash lubricated compressor, with up to 175 PSI continuous pressure capability. It has a 5" low pressure bore and a 2.75" high pressure bore, with a 3.5" stroke.
QUIN-CIP LUBRICANT SERIAL NUMBER IDENTIFICATION Refer to the chart below to order Quin-Cip-D or QuinCip compressor lubricant from your local authorized Quincy distributor. The unit serial number identification tag is located on the air tank top plate. The basic compressor serial number decal is located on the side of the crankcase opposite the oil fill side.
CRANKSHAFT GROUP 116174 QT-10 Industrial / Air Master 50314-200, October 2008 Quincy Compressor 3 3501 Wismann Lane, Quincy IL - 62305-3116
CRANKCASE GROUP 116175 QT-10 Industrial / Air Master 50314-200, October 2008 Quincy Compressor 4 3501 Wismann Lane, Quincy IL - 62305-3116
CYLINDER & HEAD GROUP 116178 (without head unloaders) QT-10 Industrial / Air Master 50314-200, October 2008 Quincy Compressor 5 3501 Wismann Lane, Quincy IL - 62305-3116
CYLINDER & HEAD GROUP 116178-001 (with head unloaders) QT-10 Industrial / Air Master 50314-200, October 2008 Quincy Compressor 6 3501 Wismann Lane, Quincy IL - 62305-3116
CONNECTING ROD & PISTON GROUP 116176X (low pressure) QT-10 Industrial / Air Master 50314-200, October 2008 Quincy Compressor 7 3501 Wismann Lane, Quincy IL - 62305-3116
CONNECTING ROD & PISTON GROUP 116177X (high pressure) QT-10 Industrial / Air Master 50314-200, October 2008 Quincy Compressor 8 3501 Wismann Lane, Quincy IL - 62305-3116
CONTROL PIPING SCHEMATICS QT-10 Industrial / Air Master 50314-200, October 2008 Quincy Compressor 9 3501 Wismann Lane, Quincy IL - 62305-3116
PILOT VALVES 110832 Series Pilot Valve (continuous run operation) 110998 Series Pilot Valve (dual control operation) Add dash # listed below to 110998 (per pressure setting) to obtain correct pilot valve. Add dash # listed below to 110832 (per pressure setting) to obtain correct pilot valve. Dash # Load PSI Unload PSI -100 90 100 -997 * 30-70 adjustable -998 * 71-150 adjustable -999 * 151-175 adjustable * Customer to set, see differential setting chart.
Installation SUCTION VALVE UNLOADER ASSEMBLIES The pilot valve is mounted directly into the air tank. Compressors in the field, not equipped with these controls, can be converted. Consult your local Quincy distributor for assistance with conversion procedures.
TYPICAL UNIT REPAIR PARTS LIST The parts listed here are for standard QT-10 units and may or may not be applicable to specially built units. Check with your local authorized Quincy distributor for parts that can be used for custom built units. Make sure the components you order are rated within the safe operating limits of your system. If you are doubtful about which components to order, contact your local Quincy distributor.
TYPICAL UNIT REPAIR PARTS LIST The parts listed here are for standard QT-10 units and may or may not be applicable to specially built units. Check with your local authorized Quincy distributor for parts that can be used for custom built units. Make sure the components you order are rated within the safe operating limits of your system. If you are doubtful about which components to order, contact your local Quincy distributor.
QUINCY COMPRESSOR STANDARD TERMS AND CONDITIONS LEGAL EFFECT: Except as expressly otherwise agreed to in writing by an authorized representative of Seller, the following terms and conditions shall apply to and form a part of this order and any additional and/or different terms of Buyer’s purchase order or other form of acceptance are rejected in advance and shall not become a part of this order.
Reciprocating / Systems: E-mail: Website: 217.222.7700 info@quincycompressor.com quincycompressor.