MSDS

Section 1 - Product Identification Supersedes: 5/4/11 Prepared: 2/13/13
Identification Of The Product:
Quick Shine - Floor Finish (Designed for the Environment)
Use Of Product:
Water-based polymer finish for sealed hardwood, tile, vinyl,
linoleum, no-wax and most other hard surface flooring.
Manufacturer:
Holloway House, Inc
309 Business Park Drive
Fortville, IN 46040
Emergency Telephone:
Inside United States: [phone]
Outside United States: [phone]
Section 2 - Ingredient Information
Chemical Name
CAS No.
%WT
Dipropylene Glycol n-Butyl Ether 29911-28-2 <3
Tributoxyethyl Phosphate 78-51-3 <3
Section 3 - Health Hazard Information
Normal Household Use:
Health injuries are not known or expected under normal use as directed.
Effects Of Overexposure:
Skin: May cause slight irritation
Eyes: May cause slight irritation
Inhalation: May cause slight irritation
Ingestion: May cause nausea and vomiting.
Section 4 - First Aid Measures
First Aid Procedures:
Skin: Wash exposed skin areas with soap and water. Get medical
attention if irritation develops or persists.
Eyes: Flush with large quantities of water, holding eyelids open. Seek
medical attention if irritation develops or persists.
Inhalation: Get to fresh air. If breathing difficulty should occur, seek medical
attention immediately.
Ingestion: Do not induce vomiting. Drink 2-3 glasses of water.
Seek medical attention immediately.
Section 5 - Fire and Explosion Data
Flash Point (Method Used):
Not Available
Flammable Limits:
Non Flammable
Lower Explosion Limit:
Not Available
Extinguishing Media:
Water
Special Fire Fighting Procedures:
Keep fire exposed containers cool by spraying with cold water.
Material Safety Data Sheet
Material Name: Quick Shine - Floor Finish (Designed for the Environment) Page 1 of 4