Instructions / Assembly

THE NEXT GENERATION IN FLOOD PROTECTION
TM
FLOOD BAGS & BARRIERS
Everything You Need to Know
How to Stack
How to Align Lengthwise
Stack rst 2 Barriers with wedge on
top of wedge & then a 3rd unit on
top for stable wall.
Brick & pyramid formation should
always be higher than water
Squish together to minimize seepage
Properly stagger with water ow direction
Note: For a solid base, bags
should be stacked in a 1:3 ratio.
For every 1ft of height needed,
extend the base by 3ft.
During rst
activation,
white gel
along stitching
is normal. Just wipe off.
Wedge*
**
* Place wider section of Barrier towards water, as the smaller section (wedge) prevents it from rolling.
**DO NOT want water moving in this direction causing seepage in between the Barriers.
Grows to
How to Use
• Place the Bags/Barriers in the path
of oncoming ood water.
• As they come in contact with water,
it will absorb through material &
start to swell.
• Bags & Barriers reach their full
height of 3.5in in 10 mins if enough
water is present.
• If a rush of water is expected or
you need to stack them, pre-soaking
them is recommended.
• Not for use with Salt water.
Protect Your
Property
Activates
When Wet
No Sand
Needed
SAND
Item
Flood
Bags
Jumbo
Flood Bags
Flood Barriers
Activated
Size
24in x 12in
x 3.5in H
48 in x 12in
x 3.5in H
5ft: 5ft x 6.5in x 3.5in H
10ft: 10ft x 6.5in x 3.5in H
17ft: 17ft x 6.5in x 3.5in H
Activated
Weight
32lbs 64lbs
5ft: 34lbs
10ft: 68lbs
17ft: 116lbs
Absorbs 4gal 8gal
5ft: 4.25gal
10ft: 8.5gal
17ft: 14.5gal