4471439 (Light gray) Upholstered Bed Queen Weight Limit: 500 Lb / 227 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/replacement-parts or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. KT.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. ● Call our toll free number if you need assistance.
A1 A Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts B C D F All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard X1 G Back Panel X1 I X2 K J Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts IMPORTANT: Below part numbers list is unique to your product. Please keep it on hand when calling for replacement parts. A A1 B C D F G H I J K L M N O1 S T X Y Z Replacement Parts, visit www.dhpfurniture.
1 3 2 Hardware Pack 5 4 Hardware Pack #: T4107119-00 1/4" X 3/4" X 40 1/4" X 1 3/8" X6 1/4" X 1 9/16" X 28 1/4" X 1 3/4" X3 5/16" X 2 1/4" X4 8 7 6 1/4" X3 Wrench X1 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Attach F and H to C and D with ❸. Repeat the same step for remaining parts C, D, F and H. F C The slat holes on part F should be facing upward.
Step 2 The slat holes on part G should be facing upward. Attach G x 2 to previous subassembly D C and D with ❸. Repeat the same step for remaining parts G.
Step 3 T C S Attach S to D and T to C with ❶. Repeat the same step for the other subassembly C and D.
Step 4 Stick A1 to the back of A with Velcro as illustrated.
Step 5 A Screw ❷ into A and ❶ into B, leave half of the thread exposed. B Do not completely tighten the BOLTS, leave half of length exposed.
Step 6 A Hang sub-assembly C and D on A and B as illustrated, don't completely tighten the bolts until STEP 10 is complete.
Step 7 Attach N to Z with ❺. Repeat the same step for remaining parts N and Z.
Step 8 2 A 8.1 Attach N x 4 to A, B, C and D with ❶; C 8.2 Attach L x 2 to H x 2 with ❷. H N Z L 1 8.2 8.
Step 9 Insert I x 2 and J into M x 2, then fix them I with ❶. M J Slat holes on part I and J should be facing upward.
Step 10 Attach subassembly from previous STEP to A and B with ❶, then properly tighten all the bolts.
7 4 Step 11 Attach K to F x 2 and J with ❹ and ❻.
Step 12 X X Y O1 O1 O1 O1 I G 12.2 12.1 12.3 12.1 Insert O1 into X; 12.2 Press X into F and G, repeat the same procedure for the opposite side of the bed with a new O1 and X. 12.3 Insert ends of both slats O1 into Y, then press Y into I and J as illustrated. Repeat the same procedures going backwards for every row of slats. SLAT WARNING X Y G F X Correct: Slat curve should be facing upwards. G I O1 J Incorrect: Slat curve facing downwards.
Helpful Hints Weight Limit: 500 Lb / 227 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old. ● Prohibit jumping and horseplay on this bed.
4471439 (Gris claro) NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Cama tapizada Visite www.dhpfurniture.
Partes Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts IMPORTANTE: la lista de números de pieza que aparece a continuación es exclusiva de su producto. Por favor, manténgalo a mano cuando solicite piezas de repuesto. Todo se incluye en 1 caja grande! Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para completar este ensamblaje.
Paquete de componentes Paquete de componentes #: T4107119-00 Nota: Por favor no apriete completamente las piezas hasta que el ensamblaje sea completado, a menos de que se indique específicamente en las instrucciones de paso a paso. Paso 12 12.1 Inserte O1 en X; 12.2 Presione X en F y G; repita el mismo procedimiento para el lado opuesto con otro O1 y X. 12.3 Insertar los extremos de los listones O1 en Y; luego presione Y sobre I y J como se ilustra.
Límites de peso: 500 Lb / 227 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
4471439 (Gris clair) NE RETOURNEZ PAS AU MAGASIN ! Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Lit rembourré Visitez www.dhpfurniture.com/fre/replacement-parts ou appelez au 1-800-267-1739 Grand lit deux places Date d'achat Numero de lot CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
Pièces Pièces de rechange, visitez www.dhpfurniture/fre/replacement-parts IMPORTANT: La liste des références ci-dessous est propre à votre produit. Veuillez le garder sous la main lorsque vous appelez des pièces de rechange. Tout dans 1 grosse boîte! Il y a des boîtes intérieures qui contiennent les composants pour completer l'assemblage.
Quincaillerie Emballage coque #: T4107119-00 Remarque: Ne serrez pas complètement les boulons jusqu'à ce que l'ensemble est achevé, sauf indication contraire dans les intructions étape par étape. les vis & les boulons utilisés dans chaque étape sont présentés en taille réelle dans le coin inférieur droit de la page. Étape 12 12.1 Insérer O1 dans X; 12.2 Presser X sur F et G, Répétez la même procédure pour le côté opposé avec un autre O1 et X. 12.
Limite de Poids: 500 Lb / 227 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.