Installation Guide

13
Copyright © 2019 Ribbon Communications Operating Company, Inc (“Ribbon”). All rights reserved.
Product Overview
Table 2-3 EdgeMarc 6000 uCPE Back Panel Components
Physical
Label/Type Function Description
Optical WAN
SFP Ports 1-2
WAN
Small Form
-
Factor Pluggable (SFP) for fiber (RJ45)
Gigabit Ethernet connectivity.
Either the SFP port (operating at 100/1000 Mbps) or the
RJ45 (operating at 10/100/1000 Mbps) port can be
active at a time.
Ethernet LAN
Ports 1-4
LAN
2x2 10/100/1000 Mbps RJ45 Ethernet ports for LAN
network connectivity.
LTE Micro
SIM
Slot
4G LTE
Support
Allows you to insert a 4G LTE micro SIM card thus allow
-
ing 4G network access.
Micro SD Card
Interface
Storage
Allows the EdgeMarc to save configurations and other
files to an SD High Capacity (SDHC) Version 2.0 card.
Maximum
storage capacity is 32 GB per SD card, 4 GB
per file. The SD card capabilities are configured with the
web-based configuration menu and with command-
line
interface (CLI).
Refer to EdgeMarc 6000 uCPE MicroSD Card
Specifications.
USB 3.0 Port
Data
Transmission
Can be used to connect USB devices.
T1/E1 LEDs
Status
When lit, the T1/E1 port is active.
Refer Table 2-2.
T1/E1 PRI Ports
1-2
T1/E1
Allows the user to
transmit voice and data through PRI.
2 x T1/E1 default system configuration. Two ports are
available on the main board.
Line Ports 1
-
2
FXO
2 x RJ11 ports for 2 FXO channels.
Phone Ports 1
-
8
FXS
6 x RJ11 ports for 6 FXS channels.
FXO/FXS LEDs
Status
Refer to
Table 2
-
2
for FXO/FXS LED status details.
Management
Console Port
Management
RJ45 serial craft port for console management.
This port is used for debug or diagnostic purposes only.
Primary system configuration is performed from a web
browser as described in the EdgeMarc User Guide.