Product Info

LTE Standard Module Series
EG91 Series Hardware Design
EG91_Series_Hardware_Design
86 / 102
LTE-FDD B2 (10MHz) -97.7dBm NA NA -94.3dBm
LTE-FDD B3 (10MHz) -98.2dBm NA NA -93.3dBm
LTE-FDD B4 (10MHz) -97.7dBm NA NA -96.3dBm
LTE-FDD B5 (10MHz) -99.2dBm NA NA -94.3dBm
LTE-FDD B7 (10MHz) -96.7dBm NA NA -94.3dBm
LTE-FDD B8 (10MHz) -98.0dBm NA NA -93.3dBm
LTE-FDD B28 (10MHz) -98.7dBm NA NA -94.8dBm
LTE-FDD B66 (10MHz) -97.7dBm NA NA -95.8dBm
6.7. Electrostatic Discharge
The module is not protected against electrostatic discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the module’s electrostatic discharge characteristics.
Table 48: Electrostatic Discharge Characteristics (25ºC, 45% Relative Humidity)
Tested Interfaces Contact Discharge
Air Discharge
Unit
VBAT, GND ±5 ±10 KV
All Antenna Interfaces ±4 ±8 KV
Other Interfaces ±0.5 ±1 KV
6.8. Thermal Consideration
In order to achieve better performance of the module, it is recommended to comply with the following
principles for thermal consideration: