ASSEMBLY INSTRUCTIONS FULL LOFT BED WITH SLIDE BRIDGE WF286244 PAGE 1 OF 11
ASSEMBLY INSTRUCTIONS ! SAFETY WARNINGS ! 1. This bed is designed for use only matress(es) meeting the specifications on the upper bunk : Upper bunk (bunk bed and tribed included) Bed Type Length Width Thickness Full Standard 74"-75" 53" - 54" 6" max 2. Replacement part, including additional guardrails, may be obtained from any of our (GIGACLOUD TECHNOLOGY (USA) INC.) dealer 3. Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton.
ASSEMBLY INSTRUCTIONS KEEP AI for future use 1. At the beginning : Tighten all hardware. Check metal parts for rust. If found, sand and repaint using a nonlead-based paint meeting the requirements of 16 CFR 1303. Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members. rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. 2. Twice a month 3.
ASSEMBLY INSTRUCTIONS 23 24 22 12 4 23 13 7 20 22 8 21 9 11 3 19 12 2 6 10 13 19 17 5 15 1 17 14 16 PAGE 4 OF 11 18
ASSEMBLY INSTRUCTIONS PARTS LIST WF286244 1 2 3 4 5 6 7 8 9 10 11 12 Left front leg Left back leg Right front leg Right back leg Ladder left leg Left guard rails support Back guard rails support Roof front & back support Front guard rails Front side rail Back side rail Head board panels 1pc 13 1pc 14 1pc 15 1pc 16 1pc 17 1pc 18 1pc 19 2pcs 20 2pcs 21 1pc 22 1pc 23 4pcs 24 Head board panels Slide left leg Slide right leg Slide panel Slide support Slide bottom panel
ASSEMBLY INSTRUCTIONS J Step 1 C L J C 12 x2 J J L 13 x1 4 x1 C J J J E 19 x2 J L J J L C 19 x1 F F 12 x2 3 x1 J J 5 x1 J L 2 x1 13 x1 C J J C L 1 x1 F 6.5x60 3PCS L 4x58 1PC E 6.5x80 3PCS J Ø10x40 22PCS C 6.
ASSEMBLY INSTRUCTIONS Step 2 J 23 x2 D J D L L L 4x58 1PC J Ø10x40 2PCS Step 3 22 x2 D 6.5x90 2PCS L L F L F F J J J F J F J J Ø10x40 4PCS L 4x58 1PC F 6.
ASSEMBLY INSTRUCTIONS Step 4 E E G J 24 x1 F J J E 8 x2 G L 11 x1 J J L 20 x1 E E G 10 x1 J F G J G L L G 1/4x75 8PCS L 4x58 1PC F 6.5x60 2PCS J Ø10x40 8PCS E 6.
ASSEMBLY INSTRUCTIONS Step 5 L F L F 9 x2 6 x1 L E J I L J E I L L I 1/4x35 2PCS L 4x58 1PC F 6.5x60 3PCS J Ø10x40 2PCS E 6.
ASSEMBLY INSTRUCTIONS Step 6 First attach 2pcs part 21 to the front and end of the frame between headboard. Then attach the remaining part 21 equidistantly between headboard. A A 21 x14 A 7 x1 A 3-1/8" 3-1/8" Note : Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break.
ASSEMBLY INSTRUCTIONS Step 7 F 16 x1 K L J F B K J K B B F 17 x2 J L 15 x1 F F F F J 17 x2 F J J 14 x1 F 18 x1 F J B Ø4x15 4PCS K 70x26x18 2PCS L 4x58 J Ø10x40 10PCS F 6.