User's Manual Part 2

62
Basic operations
Freeze an image
Split the imaging screen
The system allows splitting the imaging screen into two sections to view
two current scans for a patient. The operator can acquire one scan for
the patient, enable split screen, and then acquire another scan from a
different angle, location or with a different scan mode.
On the imaging screen, touch
> Dual. The ultrasound software
immediately freezes the current scan, and copies the current settings for
the image to the second screen.
Menu
Adam, Smith
1234567
27 01/01/1988
Liver
09/03/2015 02:56PM
Dr. Smith
Medical
Center
B Color PW
TI 0.27
MI 1.04
CLA
M Power
0 0
Gn 58
15.0cm 4FPS
1/ 1
M/ 80.0
Color Gain 45
Gn 45
M/ 80.0
1.0
20.0
1/ 3
PRF 1.0
15
Steering 0
-15
WF 20.0
12
Color Function
Freeze Save Image
Fun.Key Tuning TGC
Penetration Resolution
End Exam
Figure 17 Dual screen
To select a screen, touch Toggle. Only one screen can be active at a
time. The operator can then apply any image control settings and use
scan modes independently to either screen. For example, the operator
can acquire a 2D scan, activate dual screen, and then acquire a Color
Doppler scan in the second screen.
To leave the dual screen, touch Dual again.
Freeze an image
During a real-time scan, touch Freeze to freeze live ultrasound images
recorded by frame and stored temporarily in the cine buffer. Depending
on the mode selected, a certain number of frames are recorded.

To view the saved images frame by frame, touch / .

To play back saved images in a continuous cine loop, touch .

To re-start a new live scan, touch Freeze again.

If no frozen image or cine loop are saved, restart live scanning
erases the frame data. Make sure any needed images are saved
or printed before acquiring new scan data.